LS-56-01 sensibility
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
LS-56-01 sensibility
Hi everyones,
I'd like to make my LS-56-01 harder, maybe they are some extra parts I could add on it (some plate, etc...) to make it harder.
Usually I'm used to LS-32-01, but I like the size of the body of the 56-01 and I was wondering if it's possible to mod it to make it hard and precise like a 32-01.
Thanks!
I'd like to make my LS-56-01 harder, maybe they are some extra parts I could add on it (some plate, etc...) to make it harder.
Usually I'm used to LS-32-01, but I like the size of the body of the 56-01 and I was wondering if it's possible to mod it to make it hard and precise like a 32-01.
Thanks!
Arcade's nice when done well
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: LS-56-01 sensibility
Does harder mean stiff? Because the LS-56 is the stiffest stick Seimitsu manufacture (excluding the LS-38, which they don't even acknowledge on their site).
http://www.seimitsu.co.jp/joy.html
バネの柔らかさ, spring tension. The higher the number, the more stiffer the stick is.
I guess you're looking for some other quality?
http://www.seimitsu.co.jp/joy.html
バネの柔らかさ, spring tension. The higher the number, the more stiffer the stick is.
I guess you're looking for some other quality?
- zak
- Acetated
- Posts: 1632
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: LS-56-01 sensibility
If you want to make it stiffer, just add an extra spring. I can't imagine why you'd want to do that though, it's already too stiff!
- SuperPang
- Master or universe
- Posts: 11010
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: LS-56-01 sensibility
I'm not sure we're talking about the same thing. Check the product page. The LS-32 is:
バネの柔らかさ 5
and the LS-56 is:
バネの柔らかさ 7
However, the model number has nothing to do with it. The LS-60 is their softest stick:
バネの柔らかさ 2
Or is this some joke about penises I'm not getting? If it is, then nevermind. With age and penises it goes the other way, lower is better.
バネの柔らかさ 5
and the LS-56 is:
バネの柔らかさ 7
However, the model number has nothing to do with it. The LS-60 is their softest stick:
バネの柔らかさ 2
Or is this some joke about penises I'm not getting? If it is, then nevermind. With age and penises it goes the other way, lower is better.
- SuperPang
- Master or universe
- Posts: 11010
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: LS-56-01 sensibility
Oh no, carry on. I thought you meant the model number.
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: LS-56-01 sensibility
Yeah I mean tighter, or stiff. For example, I've played Mushi with an LS-32-01 back in the days and I remember my play was more effective since I could pass through/across (avoiding) the bullets with more precision.
With the LS-56 - even if the number is higher (7), which should mean tighter than an LS-32 (5) - my impression is the following: one little blow to the left (for about one pixel only, just enough to avoid a bullet, but no more since I don't want to touch the bullet on the right) and the ship goes more far (two pixel maybe), so, instead of stopping dead, (with the LS-32 it stopped more quick) the ship continues one pixel more and hit the bullet on the right. So, less precision.
I wouldn't say the LS-56 is close to a Sanwa JLF, but less stiff than an LS-32 (even if I also notified the tension difference (5 & 7).
But this, maybe because my stem looks longer since my U plate is shorter.
>Nem/Zak : Can I see the link for a Seimitsu higher tension spring? Maybe it can resolve my issue.
I ask this because Orihara (Tops) told me they don't have a higher tension spring for sale for that stick (also by Seimitsu).
With the LS-56 - even if the number is higher (7), which should mean tighter than an LS-32 (5) - my impression is the following: one little blow to the left (for about one pixel only, just enough to avoid a bullet, but no more since I don't want to touch the bullet on the right) and the ship goes more far (two pixel maybe), so, instead of stopping dead, (with the LS-32 it stopped more quick) the ship continues one pixel more and hit the bullet on the right. So, less precision.
I wouldn't say the LS-56 is close to a Sanwa JLF, but less stiff than an LS-32 (even if I also notified the tension difference (5 & 7).
But this, maybe because my stem looks longer since my U plate is shorter.
>Nem/Zak : Can I see the link for a Seimitsu higher tension spring? Maybe it can resolve my issue.
I ask this because Orihara (Tops) told me they don't have a higher tension spring for sale for that stick (also by Seimitsu).
Arcade's nice when done well
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: LS-56-01 sensibility
Yeah, Seimitsu doesn't offer different springs for their sticks. Actually neither does Sanwa. You'll have to go to some reseller.
Arcadeshock sells a kit, but they ship only to the US:
https://arcadeshock.com/products/seimit ... n-joystick
Arcadeshock sells a kit, but they ship only to the US:
https://arcadeshock.com/products/seimit ... n-joystick
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: LS-56-01 sensibility
Great! Thanks!
Btw, do you know which tension is the spring delivred with the LS-56 as basis (4lbf, 2lbf, 1.12 lbf, 0.9 lbf, 0.4lbf)?
Btw, do you know which tension is the spring delivred with the LS-56 as basis (4lbf, 2lbf, 1.12 lbf, 0.9 lbf, 0.4lbf)?
Arcade's nice when done well
- necroticart
- Posts: 3
- Joined: June 15th, 2018, 12:20 pm
- Location: United States, Pittsburgh
- eBay: Froggiethegfunk
- Initials: JRR
Re: LS-56-01 sensibility
To me the LS 56-01 falls as close as you can get to a Japanese style happ stick just better. I have one installed with a bat top in my Mortal Kombat stick with sanwa buttons
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79