Super Neo 29 Type II (Hyper Neo 64) Question.
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Super Neo 29 Type II (Hyper Neo 64) Question.
Hi guys,
First time setting this up.. So I understand this variant is set up for hyper 64.
However I don't have hyper64 system to test. So I tried a 6-slot mvs.. 4 slot mvs and a Pandora jamma board to no avail.
I only get a white screen... Is this normal using said boards?
If I buy a hyper64 system will it work? I'd just rather get a nice 29 inch MVS or jamma experience if possible.
Appreciate any help how this can be done.
Adam
First time setting this up.. So I understand this variant is set up for hyper 64.
However I don't have hyper64 system to test. So I tried a 6-slot mvs.. 4 slot mvs and a Pandora jamma board to no avail.
I only get a white screen... Is this normal using said boards?
If I buy a hyper64 system will it work? I'd just rather get a nice 29 inch MVS or jamma experience if possible.
Appreciate any help how this can be done.
Adam
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
- thegreathopper
- Geese's Bodyguard
- Posts: 1695
- Joined: August 17th, 2008, 6:56 pm
- Location: London
- eBay: thegreathopper
- Initials: STV
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
I used to own one of these cabs, it was just Jamma from what I recall so would work fine with the jamma board, the 6 slot is not Jamma so sound would be messed up but you should get a picture.
- thegreathopper
- Geese's Bodyguard
- Posts: 1695
- Joined: August 17th, 2008, 6:56 pm
- Location: London
- eBay: thegreathopper
- Initials: STV
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Or after reading that post above you may need to change some wiring around.
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
not change add this interface on the power supply
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Thanks so much for the info guys.. So it's just a powering issue to get jamma out of it?
Just found a spare 8pin molex in my garage, anyone know the exact name of the 4pin molex so I can buy in UK?
Just found a spare 8pin molex in my garage, anyone know the exact name of the 4pin molex so I can buy in UK?
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
if on your power supply you don't have that
there is a good chance that the problem is this
I don't think I have this interface
I'll check
otherwise for the connectors it is the same type for the supply of naomi motherboard
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Thanks for the info @hikaru.
Ive found someone to hopefully build me the cable. Do you have the wiring diagram for it available?
I tried to have a go myself from your photos but unsure if I have it right? (i couldnt see all of the red & black wires)
Really appreciate the help
Adam
Ive found someone to hopefully build me the cable. Do you have the wiring diagram for it available?
I tried to have a go myself from your photos but unsure if I have it right? (i couldnt see all of the red & black wires)
Really appreciate the help
Adam
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
but i take youAmb47uk wrote: ↑April 20th, 2020, 6:16 pm Thanks for the info @hikaru.
Ive found someone to hopefully build me the cable. Do you have the wiring diagram for it available?
I tried to have a go myself from your photos but unsure if I have it right? (i couldnt see all of the red & black wires)
Really appreciate the help
Adam
knowledge is only of interest if it is shared
for your diagram yes that's exactly it
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Thanks, the 8-pin cable I already had spare from my NNC. I spent hours yesterday trying to find the 4 pin connector on google to no avail.nem wrote: ↑April 21st, 2020, 8:33 am Connector series isn't Molex. It's JST VL.
https://wiki.arcadeotaku.com/w/JST_VL
Any idea what they are called?
Thanks
Adam
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Thats great thanks Hikaru, so that is definitely correct for the red and black (#1 to #4)connecting to the male 8-pin?
Just want to make 100% sure for safety.. as I guessed those completely (I couldn't see from the photo.)
Thanks again
Adam
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
yes that's exactly it
- garrz32
- Posts: 387
- Joined: January 1st, 2009, 7:41 pm
- Location: Aberdeen
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
AdamAmb47uk wrote: ↑April 21st, 2020, 9:25 amThanks, the 8-pin cable I already had spare from my NNC. I spent hours yesterday trying to find the 4 pin connector on google to no avail.nem wrote: ↑April 21st, 2020, 8:33 am Connector series isn't Molex. It's JST VL.
https://wiki.arcadeotaku.com/w/JST_VL
Any idea what they are called?
Thanks
Adam
These?
https://uk.rs-online.com/web/p/products ... lsrc=aw.ds
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Guys, extremely helpful. Thankyou so much for all your help again!!
Will let you know how I get on when it is ready for testing.
Have a good day
ADam
Will let you know how I get on when it is ready for testing.
Have a good day
ADam
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Last Q.... heres my current power supply setup
This should all be ok right?
Thanks again
This should all be ok right?
Thanks again
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Yes
once the interface is installed
the cable on the right red / black 4 pin
will not be used
it is used to power the hyper neo 64 motherboard
once the interface is installed
the cable on the right red / black 4 pin
will not be used
it is used to power the hyper neo 64 motherboard
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
So whilst the Jamma power cable is being made, I bought a hyper 64 to test.
It has no connector for the extra 5v (should it have?) ...there is 5.1v coming through the Jamma edge. But I can't tell if it is powering the board as I still get a white screen
Any help appreciated
Adam
It has no connector for the extra 5v (should it have?) ...there is 5.1v coming through the Jamma edge. But I can't tell if it is powering the board as I still get a white screen
Any help appreciated
Adam
- hikaru
- Posts: 73
- Joined: December 31st, 2014, 2:34 pm
- Location: japan
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Hello
there are several types of hyper 64 motherboards
the one used on the super neo 29 type 2 is like the one
is your super neo 29 type 2 with the mini LCD screen?
there are several types of hyper 64 motherboards
the one used on the super neo 29 type 2 is like the one
is your super neo 29 type 2 with the mini LCD screen?
-
- Please Continue...
- Posts: 21
- Joined: October 13th, 2018, 1:46 pm
- Location: UK
- eBay: adam_gracie
- Initials: ADD
Re: Super Neo 29 Type II (Hyper Neo 64) Question.
Hi Hikaru,
No it does not have LCD, just a light up marquee.
I didnt realise they are all so different.
The hyper64 board I have has a switch for MVS/JAMMA
I am hoping once I get my Jamma power cable made, then I can power this hyper 64 just by the jamma edge ..... fingers crossed!
Thanks again for all your help.
Adam
No it does not have LCD, just a light up marquee.
I didnt realise they are all so different.
The hyper64 board I have has a switch for MVS/JAMMA
I am hoping once I get my Jamma power cable made, then I can power this hyper 64 just by the jamma edge ..... fingers crossed!
Thanks again for all your help.
Adam