Sega JVS to JAMMA I/O in Blast City

Arcade cabinet hardware and accessories
Post Reply
User avatar
tonyt76
Please Continue...
Posts: 16
Joined: February 7th, 2019, 5:59 pm
Location: United States
eBay: tonyt1976

Sega JVS to JAMMA I/O in Blast City

Post by tonyt76 »

Has anyone successfully used a Sega JVS to JAMMA I/O Rev A/B in a Blast City with buttons 4-6 working?

If so please help!
User avatar
TappityTap
Please Continue...
Posts: 18
Joined: March 26th, 2019, 10:30 am
Location: VIC, Aus
eBay: n/a

Re: Sega JVS to JAMMA I/O in Blast City

Post by TappityTap »

I have a rev B working in a blast, buttons 1-5 are on jamma edge rest are on a separate header.
I just used this guide.
User avatar
crebou
Posts: 37
Joined: April 23rd, 2013, 4:17 pm
Location: France

Re: Sega JVS to JAMMA I/O in Blast City

Post by crebou »

Hi !
It's possible to send a pic of yours harness for do this TappityTap ?
It's working for you tonyt76 ?

I use the combo Blast / I/O board 838-13683-93 rev.B with this kit https://wiki.arcadeotaku.com/images/9/9 ... anual_.pdf
Harness Jamma 600-7143-001 , I/O board 838-13683-93 rev.B , harness 600-7143-004 and 600-7143-005 ..

4-6 buttons is not working :roll:
I make a CPS1 and CPS2/3 harness, it's working great...so, I try to make an homemade kick harness for Naomi, it's not good
Post Reply