NNC and CAVE CV1000 ... havent got sound!!!!
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
NNC and CAVE CV1000 ... havent got sound!!!!
Hi my friends! sorry for my english, is very bad
recently, i bought a cave kit, deathsmiles, and, when i'd try to play.... whats my surprise that the sound doesn't work!
My cabinet for yoko is a New net city.
after i try in my new astro ccity, and all good.
For remove doubts, i try another cv1000 pcb's and, happend the same, no sound in any pcb.
I read the same problem in early new astros, but, in new net no...
ideas?
recently, i bought a cave kit, deathsmiles, and, when i'd try to play.... whats my surprise that the sound doesn't work!
My cabinet for yoko is a New net city.
after i try in my new astro ccity, and all good.
For remove doubts, i try another cv1000 pcb's and, happend the same, no sound in any pcb.
I read the same problem in early new astros, but, in new net no...
ideas?
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: NNC and CAVE CV1000 ... havent got sound!!!!
What JVS to jamma adapter are you using?
Do you have the RCA / phono leads attached?
Do you have the RCA / phono leads attached?
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
Re: NNC and CAVE CV1000 ... havent got sound!!!!
Here you have a pic.
RCA / Phone attached? where?
Thanks for the answer
RCA / Phone attached? where?
Thanks for the answer
- goatboy
- Posts: 849
- Joined: October 5th, 2008, 3:39 pm
- Location: The Netherlands
- eBay: henknieborg
Re: NNC and CAVE CV1000 ... havent got sound!!!!
Looks like you got everything hooked up through the cabinet link board right? Try connecting it directly.
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: NNC and CAVE CV1000 ... havent got sound!!!!
That's the second time I've seen one of those IOs this week but I've never seen them previously. Did these come with the g60hot nonononosnncs?
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: NNC and CAVE CV1000 ... havent got sound!!!!
Have you tried any other games / system in the NNC?
I’m guessing It’s the wiring to that splitter at the side. The sound amp is at the front of the cab on that ledge. Use the RCA cable that goes to it direct to the JVS to jamma.
I’ve never touched one of this JVS to jamma convertors. It should be taking mono sound from the jamma edge, but it might not be or it may need a jumper set to do that.
If sound doesn’t work going direct to the amp, post some detailed pics of the jamma to JVS board
I’m guessing It’s the wiring to that splitter at the side. The sound amp is at the front of the cab on that ledge. Use the RCA cable that goes to it direct to the JVS to jamma.
I’ve never touched one of this JVS to jamma convertors. It should be taking mono sound from the jamma edge, but it might not be or it may need a jumper set to do that.
If sound doesn’t work going direct to the amp, post some detailed pics of the jamma to JVS board
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: NNC and CAVE CV1000 ... havent got sound!!!!
It could also be the power to the JVS to jamma board. The smaller (6pin) molex is what gives power for sound side of things on my Namco one
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
Re: NNC and CAVE CV1000 ... havent got sound!!!!
ok, continue with the test.
Please, see the video, if i unplug and plug the jacks.... the sound is on!
But, when i turn off the nnc, and, on again.... continue with the problem.
Here is the video's link.
Please, see the video, if i unplug and plug the jacks.... the sound is on!
But, when i turn off the nnc, and, on again.... continue with the problem.
Here is the video's link.
- markedkiller78
- Pony fucker
- Posts: 7585
- Joined: August 17th, 2008, 6:53 pm
- Location: Glasgow
- eBay: markedkiller78
- Initials: MAL
Re: NNC and CAVE CV1000 ... havent got sound!!!!
Well, the JVS to jamma is getting enough power.
Try plugging those RCA cables you removed directly into the amp, it’s at the front of the cabinet, on that little shelf directly above the CV1000 pcb in the video
That might point to it being that splitter on the side.
Try plugging those RCA cables you removed directly into the amp, it’s at the front of the cabinet, on that little shelf directly above the CV1000 pcb in the video
That might point to it being that splitter on the side.
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
Re: NNC and CAVE CV1000 ... havent got sound!!!!
done, but, same resultmarkedkiller78 wrote: ↑March 28th, 2019, 10:13 am Well, the JVS to jamma is getting enough power.
Try plugging those RCA cables you removed directly into the amp, it’s at the front of the cabinet, on that little shelf directly above the CV1000 pcb in the video
That might point to it being that splitter on the side.
- j69
- Posts: 717
- Joined: August 24th, 2008, 7:23 pm
- Location: Newcastle, England
Re: NNC and CAVE CV1000 ... havent got sound!!!!
Yeah. They creak and crack every time you plug a board in so I bought a harness extender to prolong the life of it!
-
- Posts: 16
- Joined: July 19th, 2018, 11:12 pm
- Location: España
- eBay: Newtroninfor
- Initials: JUA
Re: NNC and CAVE CV1000 ... havent got sound!!!!
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: NNC and CAVE CV1000 ... havent got sound!!!!
It might be worth trying one of these:
https://irkenlabs.com/jammafier/introduction
viewtopic.php?f=17&t=38556
Although I can't see USB connectors on your cab.
https://irkenlabs.com/jammafier/introduction
viewtopic.php?f=17&t=38556
Although I can't see USB connectors on your cab.