Hi, I'm facing a strange issue with the vewlix I bought. I mounted 2 brook universal fighting boards, one for each player. But I don't know how to force a specific board to be player 1 and the other to be player 2. Sometimes I boot windows 10, and boards are inverted: the previous player 1 is now player 2 and vice et versa. Is there a way to force the attribution of the board instead of random? I tried to set the Joystick windows configuration selecting a controller, and setting it as "default", but doesn't change.
Thanks for help
How to force specific controller to be player one?
- artik
- Please Continue...
- Posts: 37
- Joined: January 30th, 2019, 9:56 am
- Location: Paris
- eBay: jeff.artik
How to force specific controller to be player one?
Last edited by artik on February 21st, 2019, 2:24 am, edited 1 time in total.
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: How to force specific brook board to be player one?
[This] might be of use to you.
- artik
- Please Continue...
- Posts: 37
- Joined: January 30th, 2019, 9:56 am
- Location: Paris
- eBay: jeff.artik
Re: How to force specific brook board to be player one?
Thanks franco, after I did his tuto (I easily lost 2hours because of devcon), I found a 2minutes method. Solution posted there
-
- Please Continue...
- Posts: 2
- Joined: March 8th, 2019, 2:01 pm
- Location: Dubai
- eBay: laminus66
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
- artik
- Please Continue...
- Posts: 37
- Joined: January 30th, 2019, 9:56 am
- Location: Paris
- eBay: jeff.artik
Re: How to force specific controller to be player one?
HI laminus6. Yes, solution and easier method posted there. But I'm facing a new issue: When I connect a Xbox controller, it becomes player1! What a mess seriously... Anybody have the solution ?