Trying to run a system 18 on a Sega blast and 2930 chassis. I'm getting sync problems. It works on my Has but not my blast.
I'm not the most knowledgeable about wiring stuff but if you know how to fix this pictures showing me how to fix this would be best. Ty
Trying to run a system 18 on a Sega blast and 2930 chassis
-
- Posts: 36
- Joined: March 27th, 2018, 6:28 am
- Location: Kapaa Kauai Hawaii
- eBay: Emulat0r
- Initials: RB.
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: Trying to run a system 18 on a Sega blast and 2930 chassis
Is there a jumper you have to manually change for the resolution on that monitor?
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Trying to run a system 18 on a Sega blast and 2930 chassis
Yes, there is. It's on the upper right corner of the remote. Three really small dipswitches. You want it on 15khz and AMP for System 18.
If those are set correct, then you need to pull out the monitor and adjust H.H 15 pot (horizontal hold).
If those are set correct, then you need to pull out the monitor and adjust H.H 15 pot (horizontal hold).