Vewlix : Fastio / JVS PCB questions?

Arcade cabinet hardware and accessories
Post Reply
User avatar
penrhos
Panel Beater
Posts: 1447
Joined: September 11th, 2008, 12:08 pm
Location: Leicester - UK
eBay: ngpd002

Vewlix : Fastio / JVS PCB questions?

Post by penrhos » February 1st, 2019, 12:19 pm

Just picked up a pair of Vewlix-F and both are Fastio+Nesica card readers.

90% of the stuff I want to run is plain JVS.

I have one Taito JVS PCB is it just a matter of unplugging the Fastio PCB, swapping the 60-pin, power lead and running a USB cable into the base and leaving the card-reader disconnected?

I know Taito made a Taito 60-pin to Sega 60-pin adapter PCB does anyone have the pinout or a copy of the manual as I might try making a cross-over cable to replicate the same function.
t-s-pcb-f.jpg
t-s-pcb-r.jpg
t-s-cable.jpg
2 * Vewlix-F, 1 * Sega Rally 3, 1 * Chewlix, 2 * Euro 25", Kash Kong Pusher, TAB V-Pin.

User avatar
wigsplitta
Savile's alibi
Posts: 1034
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: Vewlix : Fastio / JVS PCB questions?

Post by wigsplitta » February 2nd, 2019, 6:55 pm

penrhos wrote:
February 1st, 2019, 12:19 MP
I have one Taito JVS PCB is it just a matter of unplugging the Fastio PCB, swapping the 60-pin, power lead and running a USB cable into the base and leaving the card-reader disconnected?
Yep, that will work nicely. The fast IO pinout is the same as the normal IO

I've also got one of the Sega-Taito adaptors that you've pictured. I'll try and dig it out to get the pinout for you. I could do with something similar for Konami-Sage/Taito. The Windy II JVS IO doesn't like anything I've connected to it yet! :problem:
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。

Post Reply