Adding phono input to NAC
- gozaimas
- Posts: 90
- Joined: September 24th, 2018, 11:26 am
- Location: UK
- eBay: yodamiffy
- Initials: GOZ
Adding phono input to NAC
I'd like to add a phono input to my New Astro City, in order to allow me to run audio directly from a MAME system into the cab, rather than via Jamma (although obviously I want to keep be able to feed audio via Jamma as well, for my original boards). Is there a simple way to do this? Any help gratefully received!
- zipper
- Posts: 122
- Joined: March 20th, 2015, 11:47 am
- Location: Southend on Sea
- eBay: bazpatts
- Initials: BAZ
Re: Adding phono input to NAC
The easiest thing to do is get a cheap little amp. I've used these before : https://www.ebay.co.uk/itm/TDA7297-AC-D ... 4902.l9144
You can run 12v from the power supply in the cab, and then run the amplified output to the speakers.
You can run 12v from the power supply in the cab, and then run the amplified output to the speakers.
- gozaimas
- Posts: 90
- Joined: September 24th, 2018, 11:26 am
- Location: UK
- eBay: yodamiffy
- Initials: GOZ
Re: Adding phono input to NAC
Perfect - thank you
- zipper
- Posts: 122
- Joined: March 20th, 2015, 11:47 am
- Location: Southend on Sea
- eBay: bazpatts
- Initials: BAZ
- gozaimas
- Posts: 90
- Joined: September 24th, 2018, 11:26 am
- Location: UK
- eBay: yodamiffy
- Initials: GOZ
Re: Adding phono input to NAC
finally getting around to hooking this up -- excuse the extremely basic question, but what type of wire should I be using for the connections?
Is 0.25mm Copper Wire 30AWG the right sort?
Is 0.25mm Copper Wire 30AWG the right sort?