Using Tokens

Arcade cabinet hardware and accessories
Post Reply
LordBuru
Please Continue...
Posts: 10
Joined: September 26th, 2018, 2:48 pm
Location: Canada
eBay: lordsxo
Initials: CRR

Using Tokens

Post by LordBuru »

So I have a Sega New Net City set up, and I like using token to coin-op and not a button. This isn't me first machine and I have around 200 tokens sitting around that I use in my other machine. I replaced the coin-mech for one that accepts the token, and replaced the coin receptacle on the control panel. The tokens made it way past the mech then got stuck in the chute just below, where the micro switch is. The token will fit through if pushed, but won't fall through. The tokens are 25mm or 0.984. Does anyone know of a way to get these tokens to work?
LordBuru
Please Continue...
Posts: 10
Joined: September 26th, 2018, 2:48 pm
Location: Canada
eBay: lordsxo
Initials: CRR

Re: Using Tokens

Post by LordBuru »

So no one uses tokens? Or does everyone set to free play?
User avatar
yosai
Windy City
Posts: 4057
Joined: August 17th, 2008, 5:00 pm
Location: London
eBay: yosai

Re: Using Tokens

Post by yosai »

Have you tried adjusting the coin mech?

https://wiki.arcadeotaku.com/w/AD-81P_Coin_Acceptor
LordBuru
Please Continue...
Posts: 10
Joined: September 26th, 2018, 2:48 pm
Location: Canada
eBay: lordsxo
Initials: CRR

Re: Using Tokens

Post by LordBuru »

yosai wrote: November 21st, 2018, 5:33 pm Have you tried adjusting the coin mech?

https://wiki.arcadeotaku.com/w/AD-81P_Coin_Acceptor
Thank you for your suggestion, but I have replaced the coin mech to match the token, the tokens go through the mech smoothly and consistently. The part after the mech (or below) where the coin would trigger the microswitch that the token get's stuck.
User avatar
RoZioN
Posts: 163
Joined: November 21st, 2011, 12:54 pm
Location: Sweden
Initials: ASH

Re: Using Tokens

Post by RoZioN »

That sounds weird, can you provide some pictures of what it looks like?
Post Reply