Using Tokens
-
- Please Continue...
- Posts: 10
- Joined: September 26th, 2018, 2:48 pm
- Location: Canada
- eBay: lordsxo
- Initials: CRR
Using Tokens
So I have a Sega New Net City set up, and I like using token to coin-op and not a button. This isn't me first machine and I have around 200 tokens sitting around that I use in my other machine. I replaced the coin-mech for one that accepts the token, and replaced the coin receptacle on the control panel. The tokens made it way past the mech then got stuck in the chute just below, where the micro switch is. The token will fit through if pushed, but won't fall through. The tokens are 25mm or 0.984. Does anyone know of a way to get these tokens to work?
-
- Please Continue...
- Posts: 10
- Joined: September 26th, 2018, 2:48 pm
- Location: Canada
- eBay: lordsxo
- Initials: CRR
Re: Using Tokens
So no one uses tokens? Or does everyone set to free play?
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
-
- Please Continue...
- Posts: 10
- Joined: September 26th, 2018, 2:48 pm
- Location: Canada
- eBay: lordsxo
- Initials: CRR
Re: Using Tokens
Thank you for your suggestion, but I have replaced the coin mech to match the token, the tokens go through the mech smoothly and consistently. The part after the mech (or below) where the coin would trigger the microswitch that the token get's stuck.yosai wrote: ↑November 21st, 2018, 5:33 pm Have you tried adjusting the coin mech?
https://wiki.arcadeotaku.com/w/AD-81P_Coin_Acceptor
- RoZioN
- Posts: 163
- Joined: November 21st, 2011, 12:54 pm
- Location: Sweden
- Initials: ASH
Re: Using Tokens
That sounds weird, can you provide some pictures of what it looks like?