I got a New Astro City which I use with a GroovyMAME purpose built PC connected via a JPAC. Just wondering if anybody has any clean and elegant setup for this? All I can think of is opening the main door on the cabinet and having the JAMMA harness stick out, which results in wires all around your feet.
I rather not drill any holes into the cabinets body.
Elegant Way to Connect PC to Arcade?
- Deathgaze
- Please Continue...
- Posts: 6
- Joined: August 8th, 2018, 4:02 pm
- Location: Victoria, Australia
- eBay: deathgaze2
- Initials: MAT
- trev1976
- Posts: 871
- Joined: March 30th, 2009, 7:17 pm
- Location: Southampton
Re: Elegant Way to Connect PC to Arcade?
I've got my stepdown wired inside my cab and power the PC from the stepdown via a splitter. Keeps everything inside the cab that way
Check out my "1cc" YouTube Channel
YouTube
YouTube
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: Elegant Way to Connect PC to Arcade?
I have this one inside of the cab on top of the PSU in my NAC
Raspberry Pi 3B with heatsinks and custom case from thingyverse
- sound: 3.5mm jack to 2x RCA via the NVS4000
- power: wired gnd and 5v from the psu to micro usb
- video: vga addon, made myself a VGA loom for the MS9
- controls: there's a JVSPAC screwed onto the bottom. I have a dedicated JVS IO wired in the cab
- network: wireless for uploading roms on the fly
Raspberry Pi 3B with heatsinks and custom case from thingyverse
- sound: 3.5mm jack to 2x RCA via the NVS4000
- power: wired gnd and 5v from the psu to micro usb
- video: vga addon, made myself a VGA loom for the MS9
- controls: there's a JVSPAC screwed onto the bottom. I have a dedicated JVS IO wired in the cab
- network: wireless for uploading roms on the fly
- Brettster
- Posts: 186
- Joined: February 21st, 2015, 10:07 am
- Location: Leeds, UK
Re: Elegant Way to Connect PC to Arcade?
I wired a power lead to the backplate in the NAC thar powers the pc, can close the door up then
Looking for More Space!