Cabinet Art

Post by **endoe** » October 31st, 2011, 4:33 pm

I figured it was you, havent got the scan, senta friendlty reminder, didn't want to hassle the guy.He said this weekend, but nothing yet.Maybe since its a long weekend.If you could do it just in case, that'd be muchly appreciated.I'll give you $10 for doing it, if ya like, just when Im not sure, cos, Im getting paying for the the chassis the end of the week.Anyway see if ya can thatd be great.Actually, I know theres an arcade in New Zealand that had heaps of Exceleena's, if I could get an email for them they may have a spare, from a trashed cab.Do you know the arcade Im speaking about?

Post by **davewellington** » October 31st, 2011, 7:07 pm

Yep it's called Yifan's, it's in Auckland. Don't have an email address for them though, sorry. I've heard they're hard to deal with too, but see how you go.
Don't worry about money, it's really no problem.

Post by **davewellington** » November 2nd, 2011, 8:07 am

Unscrewed, will scan it tomorrow

Post by **endoe** » November 2nd, 2011, 11:58 pm

yipeeee. I'll hold the thanks

Post by **davewellington** » November 3rd, 2011, 12:01 am

All scanned up, I'll put the images together tonight unless you want them as is. PM me

Post by **davewellington** » November 3rd, 2011, 10:17 am

http://www.megaupload.com/?d=PRUMZL4N"
There you go, a mighty big PSD. Two layers - it may look like it doesn't line up on either end, but actually it's just a shadow casting down. You'll see. If you vector it, let me know, i'd be very keen to get hold of the file

Post by **endoe** » November 4th, 2011, 10:02 am

Thanks a million Dave.

Post by **Mokum** » November 10th, 2011, 6:22 am

This might be a long shot but where can I find this sticker? There got to be someone doing/selling them because the one I currently have is a repro so...

It would be ace if I could find someone with the file and ask/buy it off of him...

https://www.youtube.com/user/Fanaticcism · Post by **turntablism** » November 10th, 2011, 12:24 pm

i can send you the artwork for outer cp (.eps) give me pm

Post by **Mokum** » November 10th, 2011, 12:30 pm

PM'd

Post by **Mokum** » November 15th, 2011, 9:33 am

I can't remember where, but I've seen a light blue MVS control panel graphics. Since I've got the weird idea to adapt it to fit my Aero City's cp, I was wondering if a file made for it already exists or if someone holds that file.

Cheers!

Post by **KmanSweden** » November 15th, 2011, 10:32 am

Mokum wrote:I can't remember where, but I've seen a light blue MVS control panel graphics. Since I've got the weird idea to adapt it to fit my Aero City's cp, I was wondering if a file made for it already exists or if someone holds that file.

Cheers!

Think it might have been over at http://www.neogeomvs.com/ but the domain is blocked.

Post by **Mokum** » November 15th, 2011, 10:43 am

KmanSweden wrote:
Mokum wrote:I can't remember where, but I've seen a light blue MVS control panel graphics. Since I've got the weird idea to adapt it to fit my Aero City's cp, I was wondering if a file made for it already exists or if someone holds that file.

Cheers!
Think it might have been over at http://www.neogeomvs.com/ but the domain is blocked.

Perhaps. I still hope someone got a copy on his HD

thesharkfactor · Post by **thesharkfactor** » November 28th, 2011, 7:02 pm

its a long thread..

i have a couple of potentialy dumb questions that have been answered a dozen times, so take aim..

dumb question1..

im making a custom cpo with file: AstroCity.Panel.Alternative.Vector that i downloaded from the first post in this thread.
if i were to give the file to a printer to have it printed, would the printed item be the correct size for my astro cp?

dumb question2..

who do folks use to have thier art printed..any recomendations for a printer with the correct cpo material?

thanks

Post by **Mokum** » December 3rd, 2011, 8:17 am

Anyone got a nice "100 yen" file I can download and print?

TheCasiooooo · Post by **TheCasiooooo** » December 5th, 2011, 9:24 pm

Mokum wrote:Anyone got a nice "100 yen" file I can download and print?

Here ya go pal. http://www.megaupload.com/?d=WLNN9PT8"

Post by **Mokum** » December 6th, 2011, 9:38 pm

Thanks a bunch, I already had that and was willing to modify it a bit. Then my lazy **** told me to just buy Seimitsu ones and just apply them on the cab

Post by **yosai** » December 8th, 2011, 9:46 am

Another collection of arts, probably nothing new they can be downloaded individually.

http://www.borne-arcade.com/index.php/a ... ecursive=1"

FrankCastleAZ · Post by **FrankCastleAZ** » December 9th, 2011, 8:36 pm

I'm still looking for a high quality scan of the US/EU traditional Capcom silver/metal CPO so I can do some customizing of it before getting it printed. I know I could purchase one for like $40 or spend $10 for a donation to coinopart.com/joymonkey (as seen HERE)but I was hoping someone would have it available. I have two US woody Capcom cabs (MvC1 and MvSF) that could use it.

Can anyone come to my rescue?

-FrankCastleAZ

wonderboy · Post by **wonderboy** » January 1st, 2012, 2:40 pm

I'm looking for a 2P Egret II CP Overlay high quality scan

Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art

Re: Cabinet Art