Page 1 of 2

SNK Candy 25 panel locks

Posted: August 29th, 2018, 12:32 pm
by Cully75
Hello everybody, got a SNK Candy 25 without panel locks and can't find on the net picture of theses.
Does anyome who own one of these (I believe they are pretty similar from others SNK 25/26) could take a picture for me ?
Thanks !

Re: SNK Candy 25 panel locks

Posted: August 29th, 2018, 11:00 pm
by gordon
I will take pictures at the weekend !

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 9:02 am
by Cully75
Thank you very much, that's nice of you ;)

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 10:38 am
by gordon
25 look 3.jpg
25 Look 1.jpg
25 look 2.jpg

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 10:39 am
by gordon
25 Look 1.jpg

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 10:40 am
by gordon
25 look 3.jpg

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 10:41 am
by gordon
my first time picture uploading - sorry :D

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 11:37 am
by Cully75
Perfect Gordon ! thank you again.
I need the pieces from your 2nd pic (the ones who are under the panel). As far as it goes, I believe I will have to create them (or praying very hard that someone got spare ones).

Re: SNK Candy 25 panel locks

Posted: August 30th, 2018, 8:35 pm
by gordon
I also have to build this parts special for my Marine games Ace 25 Cab.
I think it will take several attempts to brew until it fits 100% ....

If you need, i can measure the part for from the candy 25 for you - as a base for reproduction !

Re: SNK Candy 25 panel locks

Posted: August 31st, 2018, 4:00 pm
by Cully75
gordon wrote: August 30th, 2018, 8:35 pm If you need, i can measure the part for from the candy 25 for you - as a base for reproduction !
It would be great, thank you again ;)
gordon wrote: August 30th, 2018, 8:35 pm I also have to build this parts special for my Marine games Ace 25 Cab.
What's that particular cab ? got a friend who's not bad at twisting metal, hopefully he will handle it for me :)

Re: SNK Candy 25 panel locks

Posted: September 13th, 2018, 1:31 pm
by Cully75
If you need, i can measure the part for from the candy 25 for you - as a base for reproduction !
Hi Gordon, did you had time for the measurement ? :)
Thanks !

Re: SNK Candy 25 panel locks

Posted: October 10th, 2018, 3:18 pm
by gordon
Sorry for delay, i will go for it this week !

Re: SNK Candy 25 panel locks

Posted: October 11th, 2018, 9:53 am
by Cully75
Cool, thank you Gordon :)

Re: SNK Candy 25 panel locks

Posted: October 11th, 2018, 7:00 pm
by NoAffinity
Possibly not the same cab, but if it is, the measurements of that latching part are all here:

https://forum.arcadeotaku.com/viewtopic ... dy#p470587

Re: SNK Candy 25 panel locks

Posted: October 12th, 2018, 8:16 am
by Cully75
Ty for your interest. Neo25 locks seems a bit different from the Candy25 ones though. Not sure it would fit but anyway almost the same system. A good hint :)

Image Image

Re: SNK Candy 25 panel locks

Posted: October 13th, 2018, 10:58 am
by gordon
Riegel 1.jpg

Re: SNK Candy 25 panel locks

Posted: October 13th, 2018, 10:58 am
by gordon
Riegel 2.jpg

Re: SNK Candy 25 panel locks

Posted: October 13th, 2018, 10:59 am
by gordon
Riegel 3.jpg

Re: SNK Candy 25 panel locks

Posted: October 13th, 2018, 11:03 am
by gordon
Only a skitze, I hope I could help !

Re: SNK Candy 25 panel locks

Posted: October 14th, 2018, 6:57 am
by bagheera369
For what its worth, those are really close to the ones I have in my Neo Candy 29.
I still need a set for a Super Neo 29 too...so I feel ya.