Taito Egret 3 Original PSU Conectors Type...

Arcade cabinet hardware and accessories
Post Reply
User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird »

Hello, i get 2 Taito Egret 3 Original PSU made by Taito, on mine Egret3 i have original Weiya PSU and different conectors, Taito PSU needs different conectors, i´m thinking in build an adapter to conect from Weiya conectors (in jamma) to Taito Egret3 Original PSU conectors. Problem = i need to know which type of conectors are, in Weiya i didnt find nothing grabbed in conectors but in Taito original PSU i can read "L JST"
if anyone knows which type of conectors i need please let me know, here a sample:

Image

Image
User avatar
neokoen
Posts: 270
Joined: August 24th, 2008, 10:03 am
Location: schizofrenia (a.k.a. Belgium)

Re: Taito Egret 3 Original PSU Conectors Type...

Post by neokoen »

Been a while but I think the connector type on the Wei Ya PSU is Molex Mini-Fit Jr.
User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird »

Hello, thanks for reply, it seems you´re right about weiya conectors:

https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn

https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn

Now i need to discover the Taito´s PSU type.
User avatar
neokoen
Posts: 270
Joined: August 24th, 2008, 10:03 am
Location: schizofrenia (a.k.a. Belgium)

Re: Taito Egret 3 Original PSU Conectors Type...

Post by neokoen »

I think the connectors on the Taito PSU are JST XL type, but obviously can't be sure.
User avatar
erzane
Not Made In Japan
Posts: 824
Joined: August 23rd, 2008, 12:52 pm
Location: CH
eBay: Gab79

Re: Taito Egret 3 Original PSU Conectors Type...

Post by erzane »

Taito is always JST, but junk wei-ya maybe molex
Arcade's nice when done well
User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird »

Done:

Image
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun »

Looks great! Can you advise which connectors you used?
User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird »

Sure:
Image
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun »

Dhampird wrote: January 10th, 2019, 10:53 pm Sure:
Image
I am going to be doing this same conversion. Thank you so much!
User avatar
monouchi
Polishing his shaft
Posts: 1124
Joined: February 21st, 2010, 6:16 pm
Location: Sweden
eBay: monouchi_jn
Initials: BUS

Re: Taito Egret 3 Original PSU Conectors Type...

Post by monouchi »

Well done Dhampird.
I also need to fix this.
User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird »

Hi monouchi and thanks...i think is a good option get Taito Original PSU for Taito Egret 3 and stop use Weiya original PSU, or use Weiya always with 105V to 110v not much, if not...problems can happen with different jamma board, the Weiya PSU tolerance +-15% should work ok at 115V but people recommend for that PSU always 105V or similar, **** tolerance. Taito PSU Egret 3 is better always with tolerance.
glstar
Posts: 291
Joined: November 19th, 2008, 9:56 am
Location: Italy

Re: Taito Egret 3 Original PSU Conectors Type...

Post by glstar »

I just received the Taito PSU to replace the **** Wei-ya.
Does someone knows where JST Connectors could be found?
I already order the mini molex from the link provided but i have difficult to find the two JST connectors.
Some hints?
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun »

You will need to order them via JST webshop.
User avatar
radiantsvgun
Please Continue...
Posts: 264
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun »

Thanks to OP, I finished the adapter.

Image
Post Reply