Taito Egret 3 Original PSU Conectors Type...

Arcade cabinet hardware and accessories
Forum rules
ArcadeOtaku forum introduction & rules
Post Reply
User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird » August 18th, 2018, 12:03 am

Hello, i get 2 Taito Egret 3 Original PSU made by Taito, on mine Egret3 i have original Weiya PSU and different conectors, Taito PSU needs different conectors, i´m thinking in build an adapter to conect from Weiya conectors (in jamma) to Taito Egret3 Original PSU conectors. Problem = i need to know which type of conectors are, in Weiya i didnt find nothing grabbed in conectors but in Taito original PSU i can read "L JST"
if anyone knows which type of conectors i need please let me know, here a sample:

Image

Image

User avatar
neokoen
Posts: 265
Joined: August 24th, 2008, 10:03 am
Location: schizofrenia (a.k.a. Belgium)

Re: Taito Egret 3 Original PSU Conectors Type...

Post by neokoen » August 20th, 2018, 8:48 pm

Been a while but I think the connector type on the Wei Ya PSU is Molex Mini-Fit Jr.

User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird » August 20th, 2018, 9:30 pm

Hello, thanks for reply, it seems you´re right about weiya conectors:

https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn

https://www.reichelt.com/de/en/molex-pi ... ct=vrt_pdn

Now i need to discover the Taito´s PSU type.

User avatar
neokoen
Posts: 265
Joined: August 24th, 2008, 10:03 am
Location: schizofrenia (a.k.a. Belgium)

Re: Taito Egret 3 Original PSU Conectors Type...

Post by neokoen » August 22nd, 2018, 7:24 pm

I think the connectors on the Taito PSU are JST XL type, but obviously can't be sure.

User avatar
erzane
Not Made In Japan
Posts: 537
Joined: August 23rd, 2008, 12:52 pm
Location: CH
eBay: Gab79

Re: Taito Egret 3 Original PSU Conectors Type...

Post by erzane » August 27th, 2018, 12:32 am

Taito is always JST, but junk wei-ya maybe molex
Arcade is nice when it's done well

User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird » January 6th, 2019, 10:46 pm

Done:

Image

User avatar
radiantsvgun
Posts: 96
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun » January 8th, 2019, 7:32 am

Looks great! Can you advise which connectors you used?

User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird » January 10th, 2019, 10:53 pm

Sure:
Image

User avatar
radiantsvgun
Posts: 96
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun » January 14th, 2019, 1:11 pm

Dhampird wrote:
January 10th, 2019, 10:53 MP
Sure:
Image
I am going to be doing this same conversion. Thank you so much!

User avatar
monouchi
Polishing his shaft
Posts: 1084
Joined: February 21st, 2010, 6:16 pm
Location: Sweden
eBay: monouchi_jn
Initials: BUS

Re: Taito Egret 3 Original PSU Conectors Type...

Post by monouchi » January 16th, 2019, 1:58 pm

Well done Dhampird.
I also need to fix this.

User avatar
Dhampird
Posts: 51
Joined: January 3rd, 2012, 8:00 pm
Location:

Re: Taito Egret 3 Original PSU Conectors Type...

Post by Dhampird » February 11th, 2019, 2:36 pm

Hi monouchi and thanks...i think is a good option get Taito Original PSU for Taito Egret 3 and stop use Weiya original PSU, or use Weiya always with 105V to 110v not much, if not...problems can happen with different jamma board, the Weiya PSU tolerance +-15% should work ok at 115V but people recommend for that PSU always 105V or similar, shitty tolerance. Taito PSU Egret 3 is better always with tolerance.

glstar
Posts: 289
Joined: November 19th, 2008, 9:56 am
Location: Italy

Re: Taito Egret 3 Original PSU Conectors Type...

Post by glstar » February 27th, 2019, 4:08 pm

I just received the Taito PSU to replace the shitty Wei-ya.
Does someone knows where JST Connectors could be found?
I already order the mini molex from the link provided but i have difficult to find the two JST connectors.
Some hints?

User avatar
radiantsvgun
Posts: 96
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun » February 28th, 2019, 3:16 am

You will need to order them via JST webshop.

User avatar
radiantsvgun
Posts: 96
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: Taito Egret 3 Original PSU Conectors Type...

Post by radiantsvgun » March 1st, 2019, 1:05 am

Thanks to OP, I finished the adapter.

Image

Post Reply