One of my speakers has crapped out so I need a suitable replacement pair.
They're 100mm square with a 90mm cone but most crucially the bolts are 83mm apart. Hopefully there's something out there that will save me modifying the grilles or wiring?
Domy Jr Speaker Replacement
- SuperPang
- Master or universe
- Posts: 11025
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
- mastercello
- Posts: 731
- Joined: August 18th, 2008, 11:42 am
- Location: Lucerne, Switzerland
- eBay: mastercello
- Initials: BUS
- Contact:
Re: Domy Jr Speaker Replacement
Visaton are great speakers (i use them on Bally, Williams Pins to upgrade sound section)!
I guess this one would fit: R 10 SC 8 Ohm
http://www.visaton.de/en/products/fullr ... 0-sc-8-ohm
I guess this one would fit: R 10 SC 8 Ohm
http://www.visaton.de/en/products/fullr ... 0-sc-8-ohm
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: Domy Jr Speaker Replacement
Probably but one of the spade terminals is bigger than the other (2.8mm and 4.8mm). They appear to be both 2.8mm on the stock one.
- zipper
- Posts: 122
- Joined: March 20th, 2015, 11:47 am
- Location: Southend on Sea
- eBay: bazpatts
- Initials: BAZ
Re: Domy Jr Speaker Replacement
I put these in my cab : https://www.arcadeworlduk.com/products/ ... eaker.html
Yeah, they are 4.8mm tabs, but I clip them in half with side-cutters to make 2x2.4mm tabs, which fit on my 2.8mm plugs with no problem. And they are cheap.
Yeah, they are 4.8mm tabs, but I clip them in half with side-cutters to make 2x2.4mm tabs, which fit on my 2.8mm plugs with no problem. And they are cheap.
- PrincessPrinPrin
- Posts: 577
- Joined: April 7th, 2011, 4:00 pm
- Location: Pordenone, Italy
- eBay: *mkl*
- Initials: MKL
Re: Domy Jr Speaker Replacement
It's cheap because it's ****. The kind of low quality speaker you can get in any electronic shop. And it's unshielded and since the stock one is also unshielded I say it's time to upgrade to shielded ones (as in Mastercello's link).
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Domy Jr Speaker Replacement
The only problem with good speakers in a cab is that you can hear how crap the sound quality is from some PCBs.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Domy Jr Speaker Replacement
You could just crimp a male to female adapter cable for the other terminal (or indeed snip it with wire cutters).
I bought Visaton speakers for my Astros. Honestly, it sounds as bad as it did before Regular jamma audio just sounds poor, there's no getting around the fact.
I bought Visaton speakers for my Astros. Honestly, it sounds as bad as it did before Regular jamma audio just sounds poor, there's no getting around the fact.
- SuperPang
- Master or universe
- Posts: 11025
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Domy Jr Speaker Replacement
Thanks everyone for the advice. Visatons ordered.