Page 1 of 1
Molex or JST (or AMP?)
Posted: January 14th, 2018, 11:00 am
by erzane
Hi guys,
I heard about that Molex is american, but most of the old japanese cabs I saw had Molex inside (Astros, egret2, pony).
Other: what's the difference between JST & AMP?
Thanks
Re: Molex or JST (or AMP?)
Posted: January 14th, 2018, 1:15 pm
by nem
Molex is a manufacturer, as is
JST. None of my Astros have connectors made by Molex.
AMP is a connector system by
TE.
I guess you're thinking of
Mate-N-Lok, which is a connector system, also by TE. The Pony I owned had Mate-n-lok connectors. However, Molex has a line of compatible connectors called
MLX, which is where all the confusion comes from I guess.
Re: Molex or JST (or AMP?)
Posted: January 14th, 2018, 4:39 pm
by PrincessPrinPrin
AMP was a company acquired by Tyco (now TE).
Re: Molex or JST (or AMP?)
Posted: January 14th, 2018, 11:26 pm
by erzane
I see. It's more complexe than I thought.
Is ''TE'' japanese?
Other:
Akishop is selling those ''AMP'' connectors by Sanwa
https://www.akishop.jp/connectors/139-a ... ector.html##
Could those ones replace all TE Mate-N-Lok connectors of the Pony?
Re: Molex or JST (or AMP?)
Posted: January 15th, 2018, 4:05 am
by copados33
Yes, most of them but not those that need mounting brackets.
Re: Molex or JST (or AMP?)
Posted: January 15th, 2018, 8:09 am
by cools
They won't be original specification then though. Thought that was important to you?
Re: Molex or JST (or AMP?)
Posted: January 15th, 2018, 8:32 am
by erzane
>copados
do you have a concret example of mounting brackets pls?
>cools
do you mean the Sanwa ones?
Re: Molex or JST (or AMP?)
Posted: January 15th, 2018, 9:13 am
by PrincessPrinPrin
Re: Molex or JST (or AMP?)
Posted: January 15th, 2018, 10:53 am
by cools
erzane wrote:>copados
do you have a concret example of mounting brackets pls?
>cools
do you mean the Sanwa ones?
No
erzane wrote:How wonderfull is it to be an ocd ahahahah. It's your opinion, not mine. But everybody has his weird sides.
Re: Molex or JST (or AMP?)
Posted: January 15th, 2018, 11:56 pm
by erzane
>cools:
thank you for looking into my case you will certainly be a precious help (of course it's sarcastic)
After this drawing I guess TE is a japanese society, right?
Re: Molex or JST (or AMP?)
Posted: January 16th, 2018, 12:48 am
by erzane
Actually I should have Mate-N-Lok if I look after what Nem said.
The reason why I did this thread is because I would like to replace all my used Mate-N-Lok by brand new ones & I would like to try AMP to compare their phyisionomy. I already ordered some Sanwa ones by Akishop (if they really are Sanwa, but this is what is was written as their ref.) so I will be able to make another comparaison.
My inquiry would be the following:
SInce there is a lot of different connectors that I cannot identify well, can you give me every links where I can found precisely both Mate-N-Lok & AMP connectors pls?
Here are the ones I need:
- 1P male & female + pins which fits
- 2P male & female + pins which fits
- 3P male & female + pins which fits
- 6P male & female + pins which fits
- 8P male & female + pins which fits
- 9P male & female + pins which fits
- 12P male & female + pins which fits
- 15P male & female + pins which fits
Thanks guys, your help will be appreciated (and it's ''not'' sarcastic)
Re: Molex or JST (or AMP?)
Posted: January 16th, 2018, 1:43 pm
by nem
For AMP Universal Power:
1 pin male housing, 176270-1
1 pin female housing, 176281-1
2 pin male housing, 176271-1
2 pin female housing, 176282-1
3 pin male housing, 176272-1
3 pin female housing, 176283-1
4 pin (2x2) male housing, 176273-1
4 pin (2x2) female housing, 176284-1
6 pin (3x2) male housing, 176274-1
6 pin (3x2) female housing, 176285-1
8 pin (4x2) male housing, 176275-1
8 pin (4x2) female housing, 176286-1
9 pin (3x3) male housing, 176276-1
9 pin (3x3) female housing, 176287-1
10 pin (5x2) male housing, 176277-1
10 pin (5x2) female housing, 176288-1
12 pin (4x3) male housing, 176278-1
12 pin (4x3) female housing, 176289-1
15 pin (5x3) male housing, 176279-1
15 pin (5x3) female housing, 176290-1
Male pins, 175149-1
Female pins, 175151-1
Re: Molex or JST (or AMP?)
Posted: January 16th, 2018, 2:12 pm
by cools
Best place I've found for MNL connectors in small quantities is eBay, did the same when I was repairing some Pony looms.
Re: Molex or JST (or AMP?)
Posted: January 16th, 2018, 6:06 pm
by erzane
Thanks Nem
Here are some mesures I made about one of my used Mate-N-Lock connector (the 6P).
They looks a bit different than the classic universal AMP you found for me, and pins aren't the same to. They have rounded ending and are more thick.
Since I would like to purchase Mate-N-Lock to, pls can you do the same listing for those last ones if you find them by Digikey?
Re: Molex or JST (or AMP?)
Posted: January 16th, 2018, 6:35 pm
by nem
Like cools, I've only ever bought MNL connectors in small quantities from eBay. I don't have any model numbers on hand for you.
Re: Molex or JST (or AMP?)
Posted: January 17th, 2018, 9:40 am
by erzane
Here are the link I found concerning contacts and housings
there is a lot of contacts.. Hard to find the good ones
http://www.digikey.com/short/q8b0rz
http://www.digikey.com/short/q8b0r7
Re: Molex or JST (or AMP?)
Posted: January 17th, 2018, 10:19 am
by cools
Here are the item numbers (and product codes) for the stuff I've bought - back in 2010-2011
Description: 2 way MATE N LOK multi-connector 26030/040 , Item Number 140404478508
Description: 3 way MATE N LOK multi-connector 26050/60 , Item Number 380230015313
Description: 4 way MATE N LOK multi-connector 26070/80 , Item Number 140480160738
Description: 6 way MATE N LOK multi-connector 26110/120 , Item Number 140404450396
Description: 9 way MATE N LOK multi-connector 26130/140 , Item Number 380290796845
Description: MATE N LOK Male & Female pins (pack of 12) , Item Number 140478818984
All bought from these guys:
http://stores.ebay.co.uk/Altec-Group-Al ... 34.c0.m322
Re: Molex or JST (or AMP?)
Posted: January 17th, 2018, 8:49 pm
by erzane
Great! Thanks!!