Hi,
Please can someone tell me what the correct material is for the NAC back lid?, I’m trying to work out if what I have is home made or just been repaired.
Thanks from Luke
NAC back lid CQN-1205
-
- Please Continue...
- Posts: 25
- Joined: July 24th, 2017, 6:30 pm
- Location: UK
- eBay: Stox58
- Initials: LJA
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: NAC back lid CQN-1205
Got a picture of the bit you are taking about?
-
- Please Continue...
- Posts: 25
- Joined: July 24th, 2017, 6:30 pm
- Location: UK
- eBay: Stox58
- Initials: LJA
Re: NAC back lid CQN-1205
It’s just the rectangle panel which gives access to the monitor chassisDaveyD wrote:Got a picture of the bit you are taking about?
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: NAC back lid CQN-1205
Aah ok. Originally it is made from steel
-
- Please Continue...
- Posts: 25
- Joined: July 24th, 2017, 6:30 pm
- Location: UK
- eBay: Stox58
- Initials: LJA
Re: NAC back lid CQN-1205
Ok thanks, mine is homemade then as it’s made from white pvc, thought it didn’t fit very well !DaveyD wrote:Aah ok. Originally it is made from steel
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Re: NAC back lid CQN-1205
The original panel has a joggle at the bottom so the panel fits inside the bottom edge of the hole