RiverService Jamma/ New Net City harness

Arcade cabinet hardware and accessories
Post Reply
ahcmetal
Posts: 23
Joined: June 6th, 2011, 4:34 am
Location: Minneapolis MN
eBay: swimmingthroughthemidgets

RiverService Jamma/ New Net City harness

Post by ahcmetal »

Curious if any of you guys have tried this harness before...

https://www.rs2006.co.jp/e/jamma_harness/index.html

Is this the same as the JVS/Jamma looms FrancoB used to make?
User avatar
Brettster
Posts: 182
Joined: February 21st, 2015, 10:07 am
Location: Leeds, UK

Re: RiverService Jamma/ New Net City harness

Post by Brettster »

I have not tried one myself but from the pics it looks to be well made, a few differences I can see are that the RGB lines are not attenuated with resistors, not sure if this matters with the tosh PF monitor or not but the Francob loom does have them. there's no switch for the coin mech, I'm not sure if the RS loom has any provision for a negatron, the Franco Loom does so you can play those older PCB's that require -5V if you add on the Negatron
also a minor difference but the CPS2 kick loom is a separate loom for the RS one, it's built in to the Franco loom

but as no more Franco looms are being made :cry: this should get you up and running, the resistors are an easy thing to add if they are needed
Looking for More Space!
User avatar
invzim
Posts: 474
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: RiverService Jamma/ New Net City harness

Post by invzim »

Pimping my own stuff here :awe: , working on a jvs2jamma thingie that should be available early next year.
jammafier-proto1.JPG
Details here:
https://irkenlabs.com/jammafier/introduction
I make and sell cool Arcade stuff, check out https://irkenlabs.com/ - In The Name of Science!
User avatar
invzim
Posts: 474
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: RiverService Jamma/ New Net City harness

Post by invzim »

Price point is TBD, but aiming at around 140usd + shipping.

SD is for firmware updates, and could be useful for oddball config stuff in the future.
I make and sell cool Arcade stuff, check out https://irkenlabs.com/ - In The Name of Science!
User avatar
STK
Posts: 29
Joined: December 21st, 2009, 2:26 pm
Location: Sweden
eBay: sinksurfer

Re: RiverService Jamma/ New Net City harness

Post by STK »

I like it alot! That in combination with the Retro Scaler would be an awesome solution. Where do I pre-order? :D
User avatar
invzim
Posts: 474
Joined: August 17th, 2008, 5:26 pm
Location: Oslo, Norway
eBay: prrole

Re: RiverService Jamma/ New Net City harness

Post by invzim »

STK wrote:I like it alot! That in combination with the Retro Scaler would be an awesome solution. Where do I pre-order? :D
Sorry for thread hijack.
If you'd like to secure one, MP me your name, email and country. I will not collect any payments until they are done, and getting your name on the list is not a commitment to buy - but you will need to be on the list to buy one when ready. Also helpful is cabinet type, IO board and monitor/upscaler planned.
I make and sell cool Arcade stuff, check out https://irkenlabs.com/ - In The Name of Science!
User avatar
radiantsvgun
Posts: 193
Joined: January 13th, 2009, 9:20 pm
Location: Georgia, USA
eBay: Radiantsvgun
Initials: RIC

Re: RiverService Jamma/ New Net City harness

Post by radiantsvgun »

I've got one of these looms, they are pretty simple to install, they do not support -5v so no rastan. If you have any other questions, LMK.
Post Reply