So I've done a bit of research and think I have this correct but I figured before I purchase the parts I should just ask the question myself.
I'd like to mount 2 x LS-32 sticks in my NAC. Currently it has JLFs and the NAC itself has Sanwa mounts on CP. Since my NAC has Sanwa mounts it won't nativetly fit on without a plate.
So is the below shopping list correct to get a LS-32 going?
- LS-32 stick itself
- Universal Mounting Plate https://paradisearcadeshop.com/paradise ... plate.html
- Extender for LS-32 https://www.focusattack.com/seimitsu-ls ... -extender/
So with that, a few questions, which universal mounting plate do I get? The S or a small one?
Also the wiring loom to the LS-32 I've head has a different pin layout on the molex connector compared to the Sanwa - are there any non obtrusive ways to get this to work? (eg not having to cut up wires)
Thanks!
Seimitsu LS-32 in NAC
- zerochad
- Posts: 8
- Joined: September 29th, 2016, 6:52 am
- Location: Sydney
- eBay: chaddcruze
Seimitsu LS-32 in NAC
My Site! Emulation / Arcade ramblings https://cdcruze.com
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: Seimitsu LS-32 in NAC
Does your panel look like this (don't mind the rust!):
Because if it does, then you will have problems fitting a LS-32. The body of the LS-32 is wider than the mounting holes on the panel. It's probably doable, but you will need an adapter plate in between and then you will mount the LS-32 with a mounting plate to the adapter plate with bolts and nuts.
Personally, I would just grab another Astro panel. You want one that has mounting brackets that are under and above the joystick hole like this:
Because if it does, then you will have problems fitting a LS-32. The body of the LS-32 is wider than the mounting holes on the panel. It's probably doable, but you will need an adapter plate in between and then you will mount the LS-32 with a mounting plate to the adapter plate with bolts and nuts.
Personally, I would just grab another Astro panel. You want one that has mounting brackets that are under and above the joystick hole like this:
You do not have the required permissions to view the files attached to this post.
- zerochad
- Posts: 8
- Joined: September 29th, 2016, 6:52 am
- Location: Sydney
- eBay: chaddcruze
Re: Seimitsu LS-32 in NAC
Yup that first pic is exactly what I have - thanks for the info!nem wrote:Does your panel look like this (don't mind the rust!):
Because if it does, then you will have problems fitting a LS-32. The body of the LS-32 is wider than the mounting holes on the panel. It's probably doable, but you will need an adapter plate in between and then you will mount the LS-32 with a mounting plate to the adapter plate with bolts and nuts.
Personally, I would just grab another Astro panel. You want one that has mounting brackets that are under and above the joystick hole like this:
*sigh* new panel does seem a bit more logical, any places aside from eBay and the like that sell these?
My Site! Emulation / Arcade ramblings https://cdcruze.com
- Rossyra
- Supermod
- Posts: 7902
- Joined: February 12th, 2009, 1:24 am
- Location: UK
Re: Seimitsu LS-32 in NAC
Mo does a repro that fit LS-32 flat plates.
http://videotronicsuk.com/29-2-player-c ... panel.html
JLF harnesses don't need rewired for LS-32-01/02. The header is just orientated differently above/below the pcb when when fitted, which might be where the confusion comes from.
http://videotronicsuk.com/29-2-player-c ... panel.html
JLF harnesses don't need rewired for LS-32-01/02. The header is just orientated differently above/below the pcb when when fitted, which might be where the confusion comes from.
- zerochad
- Posts: 8
- Joined: September 29th, 2016, 6:52 am
- Location: Sydney
- eBay: chaddcruze
Re: Seimitsu LS-32 in NAC
Thanks for the link! Gotcha on the 5 pin connector, thanks for clarifying!Rossyra wrote:Mo does a repro that fit LS-32 flat plates.
http://videotronicsuk.com/29-2-player-c ... panel.html
JLF harnesses don't need rewired for LS-32-01/02. The header is just orientated differently above/below the pcb when when fitted, which might be where the confusion comes from.
My Site! Emulation / Arcade ramblings https://cdcruze.com
- Rossyra
- Supermod
- Posts: 7902
- Joined: February 12th, 2009, 1:24 am
- Location: UK
Re: Seimitsu LS-32 in NAC
No problem, I actually have one of those panels on my Astro right now with LS-32-02s
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: Seimitsu LS-32 in NAC
Nice looking panel, also, TMNT (or for you guys TMHT)!!!
- zerochad
- Posts: 8
- Joined: September 29th, 2016, 6:52 am
- Location: Sydney
- eBay: chaddcruze
Re: Seimitsu LS-32 in NAC
Sweet looking CP! May I ask where you got the CP art / overlay from? (if its a repro)Rossyra wrote:No problem, I actually have one of those panels on my Astro right now with LS-32-02s
My Site! Emulation / Arcade ramblings https://cdcruze.com
- Rossyra
- Supermod
- Posts: 7902
- Joined: February 12th, 2009, 1:24 am
- Location: UK