Arcade Otaku - アーケード オタク

Seems like everyone's taken these apart and I'm not sure where the earth leads go.

Has anyone access to there naomi/net city base and could let me know where the missing points A,B,C,D go.



The others I know have been linked.

I think A goes to the right leg (looking from back), also not sure which one will goto lid.

Yes A goes into the leg. I don't think it matters which earth connects to where, so long as all of the various points are earthed to something (if that makes sense)

What I mean to say is, I've had Naomis in the past that have most of the earths connected to the top of the transformer, and spare holes next to it where you've indicated.

As long as each part (top lid, both legs, I/o tray, cp etc.) that should be earthed is earthed to something it's fine

Yeah I know where most need to go... though I just wanted to know buy default (factory standard) where they were placed.

Anyone got photos as I think Im missing a earth from C & D. I only have 2 screws in there but seems a third has been removed.

Anyone got some photos of the internals of theres?

Thanks

There's an earth lead from each inside leg and the rear lid to the base.

There's an earth lead from the jvs plate to the left leg.

There's an earth lead from the jvs plate to the bottom of the control panel.

There's an earth lead from the bottom monitor rail to the right leg.

There's an earth lead from the marquee light tray to the right leg.