HELP!!! Using jamma games on new net city
- Mazinkaiser
- Please Continue...
- Posts: 20
- Joined: June 15th, 2017, 2:36 am
- Location: Honduras
HELP!!! Using jamma games on new net city
Hi guys im finally getting a new net city in a couple of days
Which is my first candy cab i know its wired jvs ive read about all the different ways to get jamma games to play there does anyone here sell adapters or looms for jamma any tip or experience on which way to go is appreciated as i want to be able to keep the cabinet jvs as well thank you
Which is my first candy cab i know its wired jvs ive read about all the different ways to get jamma games to play there does anyone here sell adapters or looms for jamma any tip or experience on which way to go is appreciated as i want to be able to keep the cabinet jvs as well thank you
-
- Posts: 674
- Joined: February 18th, 2015, 12:03 am
- Location: Metro City
- eBay: jaime5171
Re: HELP!!! Using jamma games on new net city
Don't quote me on this, cause doesn't make much sense to me, but I think you have to chose either one or the other. It shouldn't be too difficult to make your own harnes. I think JST RA are the connectors needed for the IO http://wiki.arcadeotaku.com/w/JST_RA.
- Stompp
- Posts: 732
- Joined: July 10th, 2012, 10:58 am
- Location: Stockholm, Sweden
- eBay: uridium
- Initials: DAD
- Contact:
Re: HELP!!! Using jamma games on new net city
FrancoB used to make looms. If you're lucky you might find one second hand.
The other option is getting one of the JAMMA-JVS adapters (like the ones below). They come in a few different flavors; Konami, Namco and River Service (plus the odd no-name). The Konami and Namco performs the best (from what I've heard) but they'll also set you back $150-200 at least.
EDIT: FrancoB's loom...
The other option is getting one of the JAMMA-JVS adapters (like the ones below). They come in a few different flavors; Konami, Namco and River Service (plus the odd no-name). The Konami and Namco performs the best (from what I've heard) but they'll also set you back $150-200 at least.
EDIT: FrancoB's loom...
- dj_johnnyg
- Loves CAVE
- Posts: 727
- Joined: August 18th, 2008, 5:53 am
- Location: Auckland, NZ
Re: HELP!!! Using jamma games on new net city
Connectors on the NNC are AMP-UP connectors. If you get stuck finding them, let me know, I have a load of 10 and 12 way connectors and pins.
<edit>
You'll also need to check that the monitor supports standard Resolution (15kHz), or you'll need a CGA>VGA converter as well.
<edit>
You'll also need to check that the monitor supports standard Resolution (15kHz), or you'll need a CGA>VGA converter as well.
Snakes: They're like bits of rope, only angrier.
- sirarthurahf
- Posts: 17
- Joined: November 6th, 2012, 2:44 pm
- Location: Madrid
- eBay: theart79
- Initials: ART
Re: HELP!!! Using jamma games on new net city
I am also getting a NNC and I will use it mostly for Jamma boards. Where can you found those adapters? Any particular issue with those?Stompp wrote:FrancoB used to make looms. If you're lucky you might find one second hand.
The other option is getting one of the JAMMA-JVS adapters (like the ones below). They come in a few different flavors; Konami, Namco and River Service (plus the odd no-name). The Konami and Namco performs the best (from what I've heard) but they'll also set you back $150-200 at least.
- RoZioN
- Posts: 163
- Joined: November 21st, 2011, 12:54 pm
- Location: Sweden
- Initials: ASH
Re: HELP!!! Using jamma games on new net city
Im using the harness, HARNESS not adapter, from Riverservice. Its awesome!
- NoAffinity
- Posts: 386
- Joined: January 8th, 2017, 3:46 pm
- Location: Escondido, CA, USA
- eBay: noaffinity
- Initials: CSG
- Contact:
Re: HELP!!! Using jamma games on new net city
Beware, tho, River Service has said they are moving to a wholesale model, and have a minimum order of $300 USD (whatever that converts to in your local currency).
- Stompp
- Posts: 732
- Joined: July 10th, 2012, 10:58 am
- Location: Stockholm, Sweden
- eBay: uridium
- Initials: DAD
- Contact:
Re: HELP!!! Using jamma games on new net city
Didn't know RS has a harness as well. Only thought they had the adapter.RoZioN wrote:Im using the harness, HARNESS not adapter, from Riverservice. Its awesome!
I think the RS adapter is notorious for lag (though don't quote me on that). The others (Namco/Konami) should be ok. The Namco and Konami adapters you'll have to look here on the forums or chase them on ebay or yahoo japan.
- RoZioN
- Posts: 163
- Joined: November 21st, 2011, 12:54 pm
- Location: Sweden
- Initials: ASH
Re: HELP!!! Using jamma games on new net city
http://www.rs2006.co.jp/e/jamma_harness/index.html you need an additional hi to low converter or else youll blow the sound amp, apart from that its just plug n play provided you have a tosh PF trisync.
- JimPansenmann
- Please Continue...
- Posts: 27
- Joined: March 17th, 2017, 9:54 pm
- Location: Germany
Re: HELP!!! Using jamma games on new net city
Same Problem here.
I bought this http://www.rs2006.co.jp/e/jamma_harness/index.html
now i need an hi to low converter. can someone tell me which one to get and how to install on the loom please?
I bought this http://www.rs2006.co.jp/e/jamma_harness/index.html
now i need an hi to low converter. can someone tell me which one to get and how to install on the loom please?
- Zebius
- Posts: 16
- Joined: September 16th, 2015, 10:49 pm
- Location: Italy
Re: HELP!!! Using jamma games on new net city
Where does it says that you need a converter? Aren't that RCA plugs supposed to be connected directly to the Naomi's AMP?
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: HELP!!! Using jamma games on new net city
There's nothing in the harness that attenuates the audio.
- Zebius
- Posts: 16
- Joined: September 16th, 2015, 10:49 pm
- Location: Italy
Re: HELP!!! Using jamma games on new net city
Really? What about FrancoB's loom?
But then why use the RCA plugs?
Wouldn't be better to bypass the Naomi's audio amp, use the JAMMA on board amp and connect the harness to the speaker cables (2x 2pin AMP UP connectors)?
But then why use the RCA plugs?
Wouldn't be better to bypass the Naomi's audio amp, use the JAMMA on board amp and connect the harness to the speaker cables (2x 2pin AMP UP connectors)?
- JimPansenmann
- Please Continue...
- Posts: 27
- Joined: March 17th, 2017, 9:54 pm
- Location: Germany
Re: HELP!!! Using jamma games on new net city
The seller of the loom emailed me with this:
"Our harness has simple line for Audio. It just connect between Jamma and RF plug. I don't know exactly about "hi to low Audio converter", but anyway our harness works simply connect audio line between Jamma PCB and New net city cabinet."
But i read in forums to use a converter
"Our harness has simple line for Audio. It just connect between Jamma and RF plug. I don't know exactly about "hi to low Audio converter", but anyway our harness works simply connect audio line between Jamma PCB and New net city cabinet."
But i read in forums to use a converter
- Zebius
- Posts: 16
- Joined: September 16th, 2015, 10:49 pm
- Location: Italy
Re: HELP!!! Using jamma games on new net city
Do you have the harness? Can you check if there are resistors inside the RCA plugs?
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: HELP!!! Using jamma games on new net city
From the pic it looks like it just connects to the speaker leads, there are no RCA connectors.
- JimPansenmann
- Please Continue...
- Posts: 27
- Joined: March 17th, 2017, 9:54 pm
- Location: Germany
Re: HELP!!! Using jamma games on new net city
Yes, i have the harness and i checked the RCAs. There are no resistors inside.
You do not have the required permissions to view the files attached to this post.
- Zebius
- Posts: 16
- Joined: September 16th, 2015, 10:49 pm
- Location: Italy
Re: HELP!!! Using jamma games on new net city
Well, that's it then
You can build an attenuator circuit with a few resistors, like this one:
Google for supergun schematics for more examples.
You can build an attenuator circuit with a few resistors, like this one:
Google for supergun schematics for more examples.
- nem
- Needs a custom rank
- Posts: 2776
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: HELP!!! Using jamma games on new net city
Poor show from RS.
The AMP UP female connectors for the controls aren't even panel mountable.
The AMP UP female connectors for the controls aren't even panel mountable.
- JimPansenmann
- Please Continue...
- Posts: 27
- Joined: March 17th, 2017, 9:54 pm
- Location: Germany
Re: HELP!!! Using jamma games on new net city
@nem
What does this exactly mean?
What does this exactly mean?