Finally got one of these suckers :D

Arcade cabinet hardware and accessories
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Finally got one of these suckers :D

Post by Hrvat9 »

Hey all, I'm new to this forum and new to candy cabs altogether. A few days ago I traded my sega club kart for a new Astro city and I love it! The monitor has some wonkyness( curves in the top left and top right of the screen) but looks good nonetheless. Im sure I'll get some help here on the forum as to what to do with that
Image

My first question is what kind of buttons/ joystick are these ? The joystick feels good but the buttons are extremely light ! There's no markings on them at all to tell me if it's sanwa or seimitsu.
As you can see I need a second player harness and the extra button harness since I'm going to add 6 buttons a side. Also the tumbler on the left side control panel lock was removed so it turns by hand freely lol
Image
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
User avatar
Rossyra
Supermod
Posts: 8032
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: Finally got one of these suckers :D

Post by Rossyra »

They are both Seimitsu, the stick is an LS-32.
Image
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

Rossyra wrote:They are both Seimitsu, the stick is an LS-32.
Thank you for verifying that :). Now I'm on the hunt for the second player joystick, harness and more buttons !
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
User avatar
copados33
Posts: 506
Joined: March 20th, 2013, 1:30 pm
Location: Uruguay South America
eBay: psycho-q

Re: Finally got one of these suckers :D

Post by copados33 »

And good luck finding a Sega mounting plate for the other LS-32 :roll: , (that is if you don't already have it lol) otherwise the joystick will sit too low on the CP, Seimitsu NA mounting plate won't do, the joystick will sat like 0,5cm lower than on the Sega one:

Image

Seimitsu to the left, Sega to the right, if you end up getting a Seimitsu plate you'll need to drill screw holes.


It wont suppose a problem if you don't mind a very short joystick which will depend on your grip, otherwise there are shaft extenders for the LS-32, but you'll be better off getting a Sanwa JLF with a P-1S mounting plate instead.
User avatar
NoAffinity
Posts: 379
Joined: January 8th, 2017, 3:46 pm
Location: Escondido, CA, USA
eBay: noaffinity
Initials: CSG
Contact:

Re: Finally got one of these suckers :D

Post by NoAffinity »

Beautiful! Very nice pick-up!
User avatar
Rossyra
Supermod
Posts: 8032
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: Finally got one of these suckers :D

Post by Rossyra »

copados33 wrote:And good luck finding a Sega mounting plate for the other LS-32 :roll:
http://www.leshoparcade.com/fiche_produ ... r-Seimitsu
Image
User avatar
trev1976
Posts: 872
Joined: March 30th, 2009, 7:17 pm
Location: Southampton

Re: Finally got one of these suckers :D

Post by trev1976 »

Nice bit of info on the LS-32's , I hate JLFs
Check out my "1cc" YouTube Channel
YouTube
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

I'm already having trouble finding pink buttons :/ everywhere I've looked so far has 1-2 in stock -_- the joystick I found and I want it to be the exact same as the 1p joystick because I love the feel of it.but nope no mounting plate sadly but that link looks promising, if I need it I'm buying!

Is there a site that has everything ? (Buttons, joystick, harness) Like this I'm paying shipping from 2-3 different sites and this is adding up nicely x_x

Edit : now that I looked at the cp again, there are some mounting tabs for the 2p side , will that suffice or does the sega mounting plate bolt up to that ?
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
User avatar
copados33
Posts: 506
Joined: March 20th, 2013, 1:30 pm
Location: Uruguay South America
eBay: psycho-q

Re: Finally got one of these suckers :D

Post by copados33 »

Rossyra wrote:
copados33 wrote:And good luck finding a Sega mounting plate for the other LS-32 :roll:
http://www.leshoparcade.com/fiche_produ ... r-Seimitsu
wow :-o , thanks Ross.
Hrvat9 wrote:x

Edit : now that I looked at the cp again, there are some mounting tabs for the 2p side , will that suffice or does the sega mounting plate bolt up to that ?
You'll need the mounting plate to bolt the joystick into the CP mounting tabs, look at the 1p joystick that you already have, that metal part underneath the joystick trestle is not a part of it "per se", but an accesory, new joysticks do not include them from factory, you need to buy it apart.
User avatar
Rossyra
Supermod
Posts: 8032
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: Finally got one of these suckers :D

Post by Rossyra »

Tout le plaisir était pour moi :whoopsie:
Image
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

copados33 wrote:
Rossyra wrote:
copados33 wrote:And good luck finding a Sega mounting plate for the other LS-32 :roll:
http://www.leshoparcade.com/fiche_produ ... r-Seimitsu
wow :-o , thanks Ross.
Hrvat9 wrote:x

Edit : now that I looked at the cp again, there are some mounting tabs for the 2p side , will that suffice or does the sega mounting plate bolt up to that ?
You'll need the mounting plate to bolt the joystick into the CP mounting tabs, look at the 1p joystick that you already have, that metal part underneath the joystick trestle is not a part of it "per se", but an accesory, new joysticks do not include them from factory, you need to buy it apart.
Mounting plate it is then!
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
User avatar
FcoBenitez
Posts: 365
Joined: August 18th, 2008, 3:31 am
Location: Chile
eBay: virtuacl
Initials: KBL

Re: Finally got one of these suckers :D

Post by FcoBenitez »

This was my solution, mounts to the correct height (pic is a JLF but I think I can do the same with a LS32 stick).

https://www.instagram.com/p/BTMcGygBx8j/
2X Sega Aero City
User avatar
trev1976
Posts: 872
Joined: March 30th, 2009, 7:17 pm
Location: Southampton

Re: Finally got one of these suckers :D

Post by trev1976 »

FcoBenitez wrote:This was my solution, mounts to the correct height (pic is a JLF but I think I can do the same with a LS32 stick).

https://www.instagram.com/p/BTMcGygBx8j/
:pointup: :slowclap:

I like it
Check out my "1cc" YouTube Channel
YouTube
User avatar
copados33
Posts: 506
Joined: March 20th, 2013, 1:30 pm
Location: Uruguay South America
eBay: psycho-q

Re: Finally got one of these suckers :D

Post by copados33 »

FcoBenitez wrote:This was my solution, mounts to the correct height (pic is a JLF but I think I can do the same with a LS32 stick).

https://www.instagram.com/p/BTMcGygBx8j/

Thanks but no thanks :problem: , that thing is way too thick, judging from that pic it looks like it eats 1cm of the joystick shaft.
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

FcoBenitez wrote:This was my solution, mounts to the correct height (pic is a JLF but I think I can do the same with a LS32 stick).

https://www.instagram.com/p/BTMcGygBx8j/
Make these in bulk for the ls-32!
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

Rossyra wrote:
copados33 wrote:And good luck finding a Sega mounting plate for the other LS-32 :roll:
http://www.leshoparcade.com/fiche_produ ... r-Seimitsu
For this , do I just email and I'll get a response if it's available or not ?

Edit : nvm, the email option is "send to a friend" I guess to share it? How do I inquire about this mount!!
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
User avatar
Rossyra
Supermod
Posts: 8032
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: Finally got one of these suckers :D

Post by Rossyra »

Image
User avatar
FcoBenitez
Posts: 365
Joined: August 18th, 2008, 3:31 am
Location: Chile
eBay: virtuacl
Initials: KBL

Re: Finally got one of these suckers :D

Post by FcoBenitez »

The 3D printed spacers make the stick shaft protude exactly 24mm, and according to Per from Akishop, ir must be between 23 and 25mm :)

I will see if I can design one for LS-32 sticks :)
2X Sega Aero City
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

Rossyra wrote:info@neo-legend.com

Thank you, sorry I just skimmed theough the site really quickly lol
At work and being on my phone = hiding in the bathroom buying parts ahah
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
Hrvat9
Posts: 180
Joined: April 26th, 2017, 3:47 pm
Location: Canada
eBay: hrvaat

Re: Finally got one of these suckers :D

Post by Hrvat9 »

FcoBenitez wrote:The 3D printed spacers make the stick shaft protude exactly 24mm, and according to Per from Akishop, ir must be between 23 and 25mm :)

I will see if I can design one for LS-32 sticks :)
If you can that would be dope! I'd buy if I couldn't get my hands on an original and I'm sure others would too!
candy: Sega New Astro City , Sega Versus City
Seeeegggggaaaaaa
Post Reply