Do seimitsu dustwashers go over or under the cp?

Arcade cabinet hardware and accessories
Post Reply
tzakiel
Please Continue...
Posts: 60
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

Do seimitsu dustwashers go over or under the cp?

Post by tzakiel » February 20th, 2017, 2:14 pm

I recently got some seimitsu sticks for my Blast City and they only come with one dustwasher. Is the dustwasher supposed to sit on top of the metal control panel?

User avatar
Sp33dFr34k
Posts: 253
Joined: December 3rd, 2011, 12:27 pm
Location: The Netherlands
eBay: 3d_collector

Re: Do seimitsu dustwashers go over or under the cp?

Post by Sp33dFr34k » February 20th, 2017, 2:52 pm

Yes :)

tzakiel
Please Continue...
Posts: 60
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

Re: Do seimitsu dustwashers go over or under the cp?

Post by tzakiel » February 20th, 2017, 2:55 pm

Sp33dFr34k wrote:Yes :)
Well mine only came with one.

User avatar
nem
Posts: 1421
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Do seimitsu dustwashers go over or under the cp?

Post by nem » February 20th, 2017, 3:46 pm

The LS-32s are the only sticks that I have seen that have a separate smaller dustwasher that is supposed to go below the panel. I know the Sanwa JLF comes with two dustwashers as stock and some put the other one below the panel, but I've always thought of it more as a spare than anything else.

Looking at Seimitsu's site, there's no mention of a smaller dustwasher in the parts list, so I guess they've ditched the idea at some point.

User avatar
cools
Armed Police Buttrider
Posts: 12605
Joined: August 17th, 2008, 4:49 pm
Location: Wales, United Kingdom
eBay: hordarian
Initials: CLS

Re: Do seimitsu dustwashers go over or under the cp?

Post by cools » February 20th, 2017, 4:47 pm

I've seen LS32s with a smaller internal washer, and 2 standard washers, and without. It appears to be related to the mounting plate/age.

The JLFs are definitely supposed to be mounted with both (above and below the CP).
Image

tzakiel
Please Continue...
Posts: 60
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

Re: Do seimitsu dustwashers go over or under the cp?

Post by tzakiel » February 20th, 2017, 4:56 pm

These are LS 56-01 sticks. I assume I will just put the washers over the panel since it covers the hole and looks nicer. Just making sure I don't cause any harm by not putting them under.

User avatar
Aurich
Posts: 19
Joined: January 25th, 2016, 8:54 pm
Location: SoCal

Re: Do seimitsu dustwashers go over or under the cp?

Post by Aurich » February 20th, 2017, 5:18 pm

LS-56 washers go on top of the panel, and it's normal to not have another washer under it. Proceed!

Post Reply