Arcade Otaku - アーケード オタク

Hi everybody,

I have problems running MK, KI and other boards needing -5v in my NAC.
Is there an easy solution to get the -5v without changing the PSU? And if I need to change it to an arcade PSU, is there an easy way?

Thanks in advance
Luciano

look it up on the forum there is definitly threads on this but you can use a negatron http://www.dimensionengineering.com/products/negatron

Cool thank you. Where do I get the in voltage for it?
Also should I just solder the out voltage -5v directly to the jamma?

the volatage in comes from your powersupply ,awhat alot of people do is add a jamma adapter board and add the -5 to that

as in this post

http://forum.arcadeotaku.com/viewtopic. ... on#p220876

Perfect, thank you very much!

The best solution is to keep Mortal Kombat and Killer Instinct away from your cab

crunchywasp wrote:The best solution is to keep Mortal Kombat and Killer Instinct away from your cab

Finish him!