NAC bulb?

[Ex_Mosquito]

Sorry if this has been posted already, but what type bulb replacement would I need for a NAC? My existing one fell out inside the cab and smashed into 986pieces when I jolted it as I was lifting it over the patiodoor threshold to have a new carpet fitted :/

Cheers, Mark.

[mann0mann]

It's a FL15D bulb.

was you're old one working before? If not, you might also want to pick up a new starter too. FG-1E is the starter lamp

[Brettster]

you can use any tube that will fit
they are not voltage dependant
the starter is and must be 100V but the tubes are universal

[AeroCityMayor]

Hi Mark,

B&Q is the easiest way to get a tube, but not the cheapest!

If you want a starter, PM me your snail mail details and I'll send you one.

Cheers,

Ralph.

[zipper]

I didn't realise any tube (that fits) will work - that's good to know.
Does the NAC use screw-in starters or the normal, 2-prong twisty ones?

[phillv85]

It uses FG1E Screw ins

[Eddhorse]

Didn't know the tubes were universal, good to know.
The other thing to watch out for is the colour of white as it might be too bright.

I had an issue with the ballast interfering with the monitor, so switched to a 240v instead of 100V

[geotrig]

Didn't know the tubes were universal, good to know.
The other thing to watch out for is the colour of white as it might be too bright.

I had an issue with the ballast interfering with the monitor, so switched to a 240v instead of 100V

well universal in a way ! the ones available here are ever so slighty bigger but do fit in

[Ex_Mosquito]

Thanks a lot for your help guys! I picked one up earlier from the ref number mann0mann kindly gave me and I put it in when I got home and it's working fine.

Aerocitymayor: Thanks for the offer of a 100v starter, luckily it was fine so won't be needed. Massive thanks.