Impress monitor plugs

Arcade cabinet hardware and accessories
Post Reply
thchardcore
Posts: 143
Joined: August 19th, 2008, 8:34 am
Location:

Impress monitor plugs

Post by thchardcore » March 15th, 2009, 8:42 am

I had to disconnect the plugs to the monitor tube from the chassis and now I am confused.

Red plug from tube = degauss...yes
brown and yellow=hori....
red and blue=vert.....

The red and blue plug has 3 pins and I know where that connects.

I am worried about plugging the degauss in on the the brown and yellow as the connector is the same and there is no way to tell them apart.

The connections on the chassis are as follows (naming on pcb)

PV
PH
P1W

I am assuming that PV is vert and PH is hori. I must then assume P1W is degauss. Am I right, can someone post a pic of their chassis in their impress via the back door?

Thanks,
15khz upscaled is cheating

Post Reply