Arcade Otaku - アーケード オタク

Anybody can point me in the direction of where to find this cable? Partnumber would be great

Thank you!

Which one? I see a lot of Molex connectors

Haha sorry, it's a (Sega stock?) adapter loom for connecting a NVS4000 PSU in a New Astro City cabinet. Without it the demag coil, power switch and audio amp don't work if I understand correctly.

If anybody knows what the part number of the cable is that would be awesome.

600-6502-20

Here's useful manual for you:
http://www.fillmoregames.com/pdf/sega_420-6457.pdf

Awesome, a number, thanks!

I can't seem to find a lot via google for this number though unfortunately, I will email a couple of arcade shops and see if they can help

TMallu wrote:600-6502-20

Here's useful manual for you:
http://www.fillmoregames.com/pdf/sega_420-6457.pdf

Great call mate and awesome linkage!

Cheers,

Ralph.

Could only find one result via google, one that was sold 2,5 years ago

http://aucview.aucfan.com/yahoo/e132154704/

I have a few lines out for this one, if that doesn't succeed, is there anybody who could help me with the pinout so I could make one myself?

Hi buddy,

The pinout is on top of the PSU

HTH

Cheers,

Ralph.

Sp33dFr34k wrote:Could only find one result via google, one that was sold 2,5 years ago

http://aucview.aucfan.com/yahoo/e132154704/

I have a few lines out for this one, if that doesn't succeed, is there anybody who could help me with the pinout so I could make one myself?

Did you ever have any luck?... I may be about to find myself needing the same cable.

megalomaniac wrote:

Sp33dFr34k wrote:Could only find one result via google, one that was sold 2,5 years ago

http://aucview.aucfan.com/yahoo/e132154704/

I have a few lines out for this one, if that doesn't succeed, is there anybody who could help me with the pinout so I could make one myself?

Did you ever have any luck?... I may be about to find myself needing the same cable.

I found one on YAH which I managed to acquire with the help of rancor, a member here on the boards

Sounds expensive

$48 USD shipped SAL for both the NVS4000 and Naomi cables

That's the PSU I've got in my NAC, is it not stock? Does this one have a built in sound amp? I haven't really tinkered with it.

Edit: looks like it does, I should get sound stereo wiring for this...

For some it is, yes and you should

Those are AMP Universal Power connectors, you can find the exact part number here http://www.te.com/usa-en/product-176299-4.html then order them from Digi-key or Mouser.