Arcade cabinet hardware and accessories
thejolz
Please Continue...
Posts: 14 Joined: April 30th, 2010, 4:32 pm
Location:
Post
by thejolz » November 10th, 2015, 8:28 pm
hello, nothing in the web....only read
Outrun 2 was originally was initially developed on a F355 twin cabinet, both the Beta and Outrun 2 will function with the F355 drive board setup.
Remember you read this information at AGS first.
There is possibility of using the controller 838-12912-01 (out of a f355 sega) in a chihiro system to have ffb in OutRun2? how?
thanks!
outrun2
Posts: 253 Joined: August 18th, 2010, 6:25 pm
Location: Gloucestershire, UK
eBay: thefonzzz
Initials: GAZ
Post
by outrun2 » November 10th, 2015, 9:12 pm
If the man says it then it is true - if you don't know, Andy (ags) is the gospel on Sega stuff like this.
I've not tried it myself but I've heard that regular OR2 will function with an F355 drive board setup but not OR2SP.
Wanted:
Sega Model 3 Emergency Call Ambulance ROM board or complete Step 2 boardset.
thejolz
Please Continue...
Posts: 14 Joined: April 30th, 2010, 4:32 pm
Location:
Post
by thejolz » November 16th, 2015, 11:30 am
Andy could help please? I do not know if frequents this forum ... could you tell me the pinout to connect the 838-12912-01 board with Chihiro?
I've been looking diagrams (outrun 2 and F355), but I understand nothing
Thank you!
andygeezer
Blue Skies Ahead
Posts: 2427 Joined: August 24th, 2008, 12:25 pm
Location: Cambridge, UK
Initials: AGS
Post
by andygeezer » November 16th, 2015, 4:09 pm
Follow the f355 twin wiring.
Say hello to my little friend...
thejolz
Please Continue...
Posts: 14 Joined: April 30th, 2010, 4:32 pm
Location:
Post
by thejolz » November 17th, 2015, 4:41 pm
thanks for the interest.
I follow the scheme. Compare both schemes. but in the CN2....
CN2 go to the jvs i/o or to the chihiro filter board or both¿¿??
It´s the pinout documented somewhere?
I have no idea how to do it
One point to consider is that I have a JVS I/O Control Board Type 1, a 838-12912-01 servo motor drive BD, and a chihiro system. I miss something?
andygeezer
Blue Skies Ahead
Posts: 2427 Joined: August 24th, 2008, 12:25 pm
Location: Cambridge, UK
Initials: AGS
Post
by andygeezer » November 18th, 2015, 8:32 am
thejolz wrote: thanks for the interest.
I follow the scheme. Compare both schemes. but in the CN2....
CN2 go to the jvs i/o or to the chihiro filter board or both¿¿??
It´s the pinout documented somewhere?
I have no idea how to do it
One point to consider is that I have a JVS I/O Control Board Type 1, a 838-12912-01 servo motor drive BD, and a chihiro system. I miss something?
You need f355 i/o type2.
Say hello to my little friend...
andygeezer
Blue Skies Ahead
Posts: 2427 Joined: August 24th, 2008, 12:25 pm
Location: Cambridge, UK
Initials: AGS
Post
by andygeezer » November 18th, 2015, 8:33 am
Cheaper to get a midi servo board.
Say hello to my little friend...
thejolz
Please Continue...
Posts: 14 Joined: April 30th, 2010, 4:32 pm
Location:
Post
by thejolz » November 18th, 2015, 10:38 am
thanks for the info!
I´ll have to play without ffb meanwhile