FFB in chihiro with F355 drive board--can be done?

[thejolz]

hello, nothing in the web....only read

Outrun 2 was originally was initially developed on a F355 twin cabinet, both the Beta and Outrun 2 will function with the F355 drive board setup.

Remember you read this information at AGS first.

There is possibility of using the controller 838-12912-01 (out of a f355 sega) in a chihiro system to have ffb in OutRun2? how?

thanks!

[outrun2]

If the man says it then it is true - if you don't know, Andy (ags) is the gospel on Sega stuff like this.

I've not tried it myself but I've heard that regular OR2 will function with an F355 drive board setup but not OR2SP.

[thejolz]

Andy could help please? I do not know if frequents this forum ... could you tell me the pinout to connect the 838-12912-01 board with Chihiro?
I've been looking diagrams (outrun 2 and F355), but I understand nothing

Thank you!

[andygeezer]

Follow the f355 twin wiring.

[thejolz]

thanks for the interest.
I follow the scheme. Compare both schemes. but in the CN2....


CN2 go to the jvs i/o or to the chihiro filter board or both¿¿??
It´s the pinout documented somewhere?

I have no idea how to do it

One point to consider is that I have a JVS I/O Control Board Type 1, a 838-12912-01 servo motor drive BD, and a chihiro system. I miss something?

[andygeezer]

thanks for the interest.
I follow the scheme. Compare both schemes. but in the CN2....


CN2 go to the jvs i/o or to the chihiro filter board or both¿¿??
It´s the pinout documented somewhere?

I have no idea how to do it

One point to consider is that I have a JVS I/O Control Board Type 1, a 838-12912-01 servo motor drive BD, and a chihiro system. I miss something?

You need f355 i/o type2.

[andygeezer]

Cheaper to get a midi servo board.

[thejolz]

thanks for the info!

I´ll have to play without ffb meanwhile