Any ideas? cabling looks ok but tbh I suck at checking and everything looks ok
I have a mame setup in there also that works fine, albeit that uses a 3.5mm -> amp -> speakers.
Atomiswave cab - no sound through Jamma
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
- Mayhem
- Posts: 264
- Joined: August 17th, 2008, 10:15 pm
- Location: Stockholm, Sweden
- eBay: Mayhem_SWE
- Contact:
Re: Atomiswave cab - no sound through Jamma
Flip the stereo <-> mono switch?
Once I start I cannot stop myself
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
Re: Atomiswave cab - no sound through Jamma
Tried that no joyMayhem wrote:Flip the stereo <-> mono switch?
When I mamed/put a pc in the cab I cut into the speaker wires manually and split the signal for the normal cabinet wiring then wired in my own and terminal blocked them together.
Any other awave owners got any suggestions on cables I should be checking