here is a home made pots views on the new astro chassis
but I cant find the ''rotation'' pot
is rotation the number 16. ?????????????
and there is 2x other pots that I dont know about for sure :
the number 15. (is it the same as P.CUSh on the aw sd? )
the number 23. what is it?'???
new astro monitor pots (were is the rotation pot???)
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
new astro monitor pots (were is the rotation pot???)
Arcade's nice when done well
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: new astro monitor pots (were is the rotation pot???)
15=side pin cushion(hour glass effect)
16=horizontal size preset(factory set size adjustment)
23 looks like a width jumper(narrow or wide)
ain't no rotation pot on this,if you pic is **** then you may need to twist the yoke(instructions first mate)
16=horizontal size preset(factory set size adjustment)
23 looks like a width jumper(narrow or wide)
ain't no rotation pot on this,if you pic is **** then you may need to twist the yoke(instructions first mate)
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: new astro monitor pots (were is the rotation pot???)
15=side pin cushion = (hour glass effect) what does it mean??
23 = looks like a width jumper (narrow or wide) ?
re they important settings pot?
- if you '' pic is **** '' then you may need to twist the yoke ('' instructions first '' mate) = what does it mean ?
(my english is not the best sorry)
thanks
23 = looks like a width jumper (narrow or wide) ?
re they important settings pot?
- if you '' pic is **** '' then you may need to twist the yoke ('' instructions first '' mate) = what does it mean ?
(my english is not the best sorry)
thanks
Arcade's nice when done well
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: new astro monitor pots (were is the rotation pot???)
side pincushion=() or )(
width jumper=one position is a narrow width,the other position is a wide width.narrow= [ ] wide= [ ]
yoke is the coil on the tube,if your native language is french then maybe best to ask at one of the french forums for precise instructions
width jumper=one position is a narrow width,the other position is a wide width.narrow= [ ] wide= [ ]
yoke is the coil on the tube,if your native language is french then maybe best to ask at one of the french forums for precise instructions
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: new astro monitor pots (were is the rotation pot???)
yes I see what is the coil it s on the end of the tube but this is risky to rotate not?
why this cab have no rotation pot?
have the egret2 this pot or havent to?
why this cab have no rotation pot?
have the egret2 this pot or havent to?
Arcade's nice when done well
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: new astro monitor pots (were is the rotation pot???)
give me the make/model number or a photo and i will tell you if you have a rotation pot
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: new astro monitor pots (were is the rotation pot???)
of the egret2? or the new astro?grantspain wrote:give me the make/model number or a photo and i will tell you if you have a rotation pot
Arcade's nice when done well
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: new astro monitor pots (were is the rotation pot???)
the chassis you want to know where the rotation pot iserzane wrote:of the egret2? or the new astro?grantspain wrote:give me the make/model number or a photo and i will tell you if you have a rotation pot
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: new astro monitor pots (were is the rotation pot???)
yes i will, the problem is the reason of all my question , I reflect about the best cab sor shooting to buy (e2 or new astro)
I will ask with model of chassis is in which cab and will ask you about. like that I know for sure to buy a cab who have the right chassis with the pots that I need
thanks dudy
I will ask with model of chassis is in which cab and will ask you about. like that I know for sure to buy a cab who have the right chassis with the pots that I need
thanks dudy
Arcade's nice when done well