hi Guys !
i was wondering does anyone know what kind of mounting plate i need to fir the Seimitsi LS-32-01 in the Vewlix Panel ?
thx
Jan
Seimitsu L-32-01 + Vewlix Panel
- Jan
- EU trade negotiator
- Posts: 3834
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Seimitsu L-32-01 + Vewlix Panel
ain't got no realestateorjewelryoranyofthat
- Mayhem
- Posts: 264
- Joined: August 17th, 2008, 10:15 pm
- Location: Stockholm, Sweden
- eBay: Mayhem_SWE
- Contact:
Re: Seimitsu L-32-01 + Vewlix Panel
Assuming the mounting point is the same as on an Egret 2/3/AWSD panel you'd need the flat mounting plate of a vanilla LS-32 without the -01 suffix, also called an RE mounting plate by Seimitsu themselves.
Once I start I cannot stop myself
- Akuma
- Can't stay away from students
- Posts: 2334
- Joined: August 24th, 2008, 11:29 am
- Location: near Düsseldorf, Germany
- eBay: Akuma.from.the.Arcade
Re: Seimitsu L-32-01 + Vewlix Panel
if this is the one you need, you can get it as a spare part at arcadeshop.de - props to Jan Fleck : )
- Jan
- EU trade negotiator
- Posts: 3834
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
- Jan
- EU trade negotiator
- Posts: 3834
- Joined: August 17th, 2008, 7:56 pm
- Location: Germany
- eBay: voll gerne
Re: Seimitsu L-32-01 + Vewlix Panel
RE mounting plate won`t fit , its to smale.
panel looks like this
http://www.neo-arcadia.de/vsanwa.jpg
panel looks like this
http://www.neo-arcadia.de/vsanwa.jpg
ain't got no realestateorjewelryoranyofthat
- Mayhem
- Posts: 264
- Joined: August 17th, 2008, 10:15 pm
- Location: Stockholm, Sweden
- eBay: Mayhem_SWE
- Contact:
Re: Seimitsu L-32-01 + Vewlix Panel
Weird, what exactly was the point in same mounting solution but moving the bolts/holes further apart...? Guess you'll have to make your own mounting plate then.
Once I start I cannot stop myself