Removing Naomi Uni leg cover

Arcade cabinet hardware and accessories
Post Reply
User avatar
Pilgrim_Pramsta
Posts: 131
Joined: August 20th, 2008, 11:47 am
Location: Exeter
eBay: pilgrim_pramsta
Initials: JON
Contact:

Removing Naomi Uni leg cover

Post by Pilgrim_Pramsta »

Hi,

Am looking to run the controller cables for a DC to Naomi conversion down the leg. Have undone all the screws holding the leg cover in place and removed the hook piece at the top. It looks like the cover should slide up and off but I can't seem to budge it. I don't want to damage it so can anyone suggest (i) whether sliding is the right method and (ii) if so what the best technique to use is.

Thanks.
User avatar
Pete
Retired
Posts: 4285
Joined: August 19th, 2008, 8:23 pm
Location: Near London, UK
eBay: arcave

Re: Removing Naomi Uni leg cover

Post by Pete »

Better to take off the control panel base lower & topper, 2 bolts either side under the CP.

Image
Image

http://www.sega-naomi.com/forum/viewtop ... uild+guide

Should be much easier with it off.
Post Reply