Hi,
Am looking to run the controller cables for a DC to Naomi conversion down the leg. Have undone all the screws holding the leg cover in place and removed the hook piece at the top. It looks like the cover should slide up and off but I can't seem to budge it. I don't want to damage it so can anyone suggest (i) whether sliding is the right method and (ii) if so what the best technique to use is.
Thanks.
Removing Naomi Uni leg cover
- Pilgrim_Pramsta
- Posts: 131
- Joined: August 20th, 2008, 11:47 am
- Location: Exeter
- eBay: pilgrim_pramsta
- Initials: JON
- Contact:
- Pete
- Retired
- Posts: 4284
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Removing Naomi Uni leg cover
Better to take off the control panel base lower & topper, 2 bolts either side under the CP.
http://www.sega-naomi.com/forum/viewtop ... uild+guide
Should be much easier with it off.
http://www.sega-naomi.com/forum/viewtop ... uild+guide
Should be much easier with it off.