All about locks

Arcade cabinet hardware and accessories
zumbito
Posts: 674
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Re: All about locks

Post by zumbito »

DanielGabassi wrote:Hi guys!

I'm refurbishing a New Astro City cabinet. At this moment, the only thing missing is the lock/tongue kit.
Just found a user here at the forum that have a NAC tongue reproduction kit. Now I'm looking for the locks for that kit and just found these:

http://www.arcadespareparts.com/newslet ... 12_68.html"

Do you guys know, which lock is the correct for a NAC cabinet? They have 16mm, 20mm, 25mm, and 30mm measurements and say that all fits NAC. Witch one is the right match?

Thanks!
I am in the same situation here. New astro, blast and new net, and some of the locks won´t open. I will need to drill and buy new ones, but not sure which one to install, as I don´t know the depth, the diameter or how big the latch is.

I´m certain that some of them are Sega locks and would prefer not to drill them. In that case, is there any way to take them out? If two of them have the same number xxxx, does that mean any key with that number xxxx will open them both? Just in case I am lucky and can make copies of the keys and use the SEGA locks.
User avatar
hikaru
Posts: 73
Joined: December 31st, 2014, 2:34 pm
Location: japan

Re: All about locks

Post by hikaru »

who has a Jaleco Pony Mark II or III
I'm looking for the master key number
thank you
User avatar
zak
Acetated
Posts: 1632
Joined: October 19th, 2014, 1:35 pm
Location: UK
eBay: NA

Re: All about locks

Post by zak »

Looking for Capcom cute locks. Can anyone help? :thumbup:
User avatar
hikaru
Posts: 73
Joined: December 31st, 2014, 2:34 pm
Location: japan

Re: All about locks

Post by hikaru »

FIRST G 7758 ;)
User avatar
matt5cott
Posts: 303
Joined: August 18th, 2008, 12:18 pm
Location: Nottinghamshire
eBay: matt5cott
Initials: MAT
Contact:

Re: All about locks

Post by matt5cott »

Paulie wrote: August 27th, 2014, 10:52 pm Great idea and I know it will be really useful too/

Here's a list of the lock and tang numbers for a UK Sega Naomi (dunno if US or JPN NC/NNC's are different)

Control panel bucket - 220-5575UK - Lock
Control panel bucket - HOT-1505UK - LKG TNG

Service door - 220-5575UK - Lock
Service door - DP-1167UK - TNG LKG UK

Rear hatch - 220-5575UK - Lock
Rear hatch - NOA 1115UK - TNG Rear Hatch

Cash box door - 220-5574UK - Lock (keyed different)
Cash box door - HOT-1203XUK - Center TNG
Cash box door - HOT-1204X - Side TNG
Cash box door - 065- E00300 - E ring 3mm

My cab had locks but no keys so I ended up using the original tangs combined with STG locks from Craig
http://www.giz10p.co.uk/index.php?_a=vi ... ductId=189"
Trying to source a set of locks for my NNC, 5575/5574 but not having much luck outside of bonkers asking prices on eBay, giz10p not doing locks now either.
ImageImageImage
User avatar
aerobert
Posts: 352
Joined: June 15th, 2018, 12:37 pm
Location: Sweden
eBay: romajoh

Re: All about locks

Post by aerobert »

So anyone know what generic cam lock fits the blast city panels? I've given up looking for 5575 locks, went to a local hardware store and bought a set of cheapo locks but they are 18,7mm diameter and all holes for the Blast seem to be 16mm.

Can't find any 16mm diameter online. Any hints?
User avatar
phillv85
Please Continue...
Posts: 345
Joined: March 16th, 2013, 9:16 pm
Location:
eBay: phillv85
Initials: PAV

Re: All about locks

Post by phillv85 »

Not my auction, but there's a set on Ebay right now ending tomorrow:

https://www.ebay.co.uk/itm/Sega-5575-Or ... Sw7kRfVntd
User avatar
aerobert
Posts: 352
Joined: June 15th, 2018, 12:37 pm
Location: Sweden
eBay: romajoh

Re: All about locks

Post by aerobert »

No tangs, useless without them I suppose?
Asure
Posts: 573
Joined: April 17th, 2013, 5:16 pm
Location: Netherlands
eBay: asure_nl

Re: All about locks

Post by Asure »

Locks first, tangs later, so not really useless at all.

These are harder to get each month, you should see the prices for Astro locks these days :)
User avatar
aerobert
Posts: 352
Joined: June 15th, 2018, 12:37 pm
Location: Sweden
eBay: romajoh

Re: All about locks

Post by aerobert »

Sure but it's time consuming trying to source the tangs afterwards.
User avatar
FluxChiller
Please Continue...
Posts: 4
Joined: December 14th, 2018, 2:22 am
Location: Fairfax VA
eBay: go_team_venture!
Initials: cca

Re: All about locks

Post by FluxChiller »

Rise from your grave....

Can anyone help on what type of locks go on a SNK Super Neo 29?
TastySoil
Please Continue...
Posts: 23
Joined: March 11th, 2010, 11:01 pm
Location: Detroit, MI

Re: All about locks

Post by TastySoil »

Hey guys, I'm wondering if anyone might be able to point me to a place I can buy a replacement lock for the cash box on an Egret 2? I'm not having any luck searching for the part number from the manual. I'd love to grab the exact replacement, but i'd be open to a different model as long as it fits properly. Here is a photo of the lock I removed... (not finding anything searching for that model number on the lock either..)

Image

Thanks for any help!
User avatar
nem
Needs a custom rank
Posts: 2768
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: All about locks

Post by nem »

What kind of key slot does it have?

It's a standard size, so replacements can be found.
rogersta
Posts: 2
Joined: January 15th, 2021, 7:18 pm
Location: Virginia
eBay: rogersta11
Initials: TAR

Re: All about locks

Post by rogersta »

@codecrank sent you a pm but it seems to be stuck in my outbox. Anyways:


I am trying to source locks for a NNC I recently restored. Saw this old thread here on the forum and was hoping maybe you or somebody else still had some extra 220-5575s. Any help would be greatly appreciated.
nakajima
Posts: 20
Joined: August 5th, 2017, 9:56 am
Location: Barcelona

Re: All about locks

Post by nakajima »

overseas_inquiries@taito.co.jp

TastySoil wrote: November 28th, 2021, 10:47 pm Hey guys, I'm wondering if anyone might be able to point me to a place I can buy a replacement lock for the cash box on an Egret 2? I'm not having any luck searching for the part number from the manual. I'd love to grab the exact replacement, but i'd be open to a different model as long as it fits properly. Here is a photo of the lock I removed... (not finding anything searching for that model number on the lock either..)

Image

Thanks for any help!
Post Reply