Been at this for hours now and have got nowhere, can someone tell me or better off draw me a diagram of how i would achieve 2 channel from my 4 slot and then with a flick of a switch change so i can get Mono from both speakers on my CPS2 or any other Jamma board?
Any help muchly appreciated!
2 Channel from MVS and Mono on 2 Speakers from a CPS2?
- NeoD
- Please Continue...
- Posts: 218
- Joined: August 20th, 2008, 11:31 pm
- Location: Stoke, England
- Initials: AGP
- Contact:
- Shady994
- Please Continue...
- Posts: 405
- Joined: September 6th, 2008, 4:10 pm
- Location: Beds.
- eBay: lmstolton
- Initials: SDY
Re: 2 Channel from MVS and Mono on 2 Speakers from a CPS2?
Hey NeoD,
This isn't too hard, but you'll need a 3PDT toggle switch, which are fairly easy to get from ebay.
Here is a quick wiring diagram:
Hope this helps!
This isn't too hard, but you'll need a 3PDT toggle switch, which are fairly easy to get from ebay.
Here is a quick wiring diagram:
Hope this helps!