Lindbergh help

Arcade cabinet hardware and accessories
Post Reply
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Lindbergh help

Post by IDCHAPPY »

Hi guys, I finally put my Lindy together, 4 months after it arrived :oops:
The lindy mobo worked at first and played VT3 then we tried to boot up the Taito type 2X but it gives us an I/O error, which appears odd as it seemed to play fine on the lindy hardware... any ideas?
Pics to follow :)
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Re: Lindbergh help

Post by IDCHAPPY »

So, now I get JVS Error 0002:connect error on the TX2 and the lindy doesn't boot.... come back PCBs all is forgiven :lolno:
purplec
Posts: 598
Joined: August 17th, 2008, 6:51 pm
Location: Dublin, Ireland

Re: Lindbergh help

Post by purplec »

Type 3 io board error
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Re: Lindbergh help

Post by IDCHAPPY »

This is what I was getting on the T2X

Image

Does anyone have a picture of where the connections go? most are pretty obvious (VGA out, Power in ) but not sure where the JVS in wire goes or the dongle for the SF4 booty

Image
User avatar
crunchywasp
stompin' an' jumpin'
Posts: 8080
Joined: February 10th, 2012, 2:51 pm
Location: Northern Ireland
eBay: crunchywasp
Initials: MAK

Re: Lindbergh help

Post by crunchywasp »

Swap your dongle and JVS USB lead around and try that.
Image
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Re: Lindbergh help

Post by IDCHAPPY »

I now know that SF4 plays straight from the HD so I'll put the JVS lead in the Jamma bitty and give it another bash.
Thanks guys 8-)
User avatar
crunchywasp
stompin' an' jumpin'
Posts: 8080
Joined: February 10th, 2012, 2:51 pm
Location: Northern Ireland
eBay: crunchywasp
Initials: MAK

Re: Lindbergh help

Post by crunchywasp »

The JVS USB lead should be in the JAMMA USB socket so that should do the trick.

If you do need the dongle just stick it in any other USB port. You shouldn't need it for a boot though :penser:
Image
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Re: Lindbergh help

Post by IDCHAPPY »

Google fu suggests your right crunchy ;)
User avatar
andygeezer
Blue Skies Ahead
Posts: 2427
Joined: August 24th, 2008, 12:25 pm
Location: Cambridge, UK
Initials: AGS

Re: Lindbergh help

Post by andygeezer »

Because you need to flip the atx/jvs switch on the PSU to jvs otherwise io board will have no power!!
Say hello to my little friend...
Image
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Re: Lindbergh help

Post by IDCHAPPY »

So that's on the lindy psu Andy? at least I know the X2 boots OK :lol:
User avatar
IDCHAPPY
c***3
Posts: 2611
Joined: May 3rd, 2010, 7:25 pm
Location: Edinburgh
eBay: Arcadedreams2013
Initials: IDC
Contact:

Re: Lindbergh help

Post by IDCHAPPY »

:awe:
Image

I couldn't find the switch but thought outside the box(which for me is unusual) and plugged in the Lindy mobo too.
Just need to get the buttons and stick hooked up and it's good to go 8-)
Post Reply