Use a micrometer.
Potentiometer tops for AWSD/e2/e3 control box pots
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Potentiometer tops for AWSD/e2/e3 control box pots
I would guess that the shaft will be roughly 6mm in girth. Get a couple of these, even if the shaft is slightly wider the stretch a little so should be able to fit.
http://www.maplin.co.uk/module.aspx?Tab ... &U=Strat15"
http://www.maplin.co.uk/module.aspx?Tab ... &U=Strat15"
- Checen Rebel
- Please Continue...
- Posts: 67
- Joined: August 20th, 2008, 8:41 pm
- Location: Up t'north
Re: Potentiometer tops for AWSD/e2/e3 control box pots
Maplin staff are idiots, but are you telling me that if someone came in asking you where your soft touch knob is, you wouldn't laugh. I'd definitely be sniggering. (and possibly asking if they wanted me to make it hard first).kernow wrote:I had to deal with the moronic maplin staff, 'LOL SOFT TOUCH KNOB' etc. I almost walked out right then. idiots.
Yes, I'm immature - and proud. ;p
- Checen Rebel
- Please Continue...
- Posts: 67
- Joined: August 20th, 2008, 8:41 pm
- Location: Up t'north
Re: Potentiometer tops for AWSD/e2/e3 control box pots
I'm too OCD to leave it "unfinished" with only one. for the sake of ~£3 I'd get soft-touch knobs (fNAR fNAR!) for the other pots.
besides, I think they actually look good - some nice red or green ones would go grand on there.
besides, I think they actually look good - some nice red or green ones would go grand on there.
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Potentiometer tops for AWSD/e2/e3 control box pots
Nice mod! Well jealous Etc.
I'm going to get one for the E2 now.
I'm going to get one for the E2 now.
- erzane
- Not Made In Japan
- Posts: 824
- Joined: August 23rd, 2008, 12:52 pm
- Location: CH
- eBay: Gab79
Re: Potentiometer tops for AWSD/e2/e3 control box pots
do you want to sell it ?
I will buy it
I will buy it
Arcade's nice when done well
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
- matt5cott
- Posts: 303
- Joined: August 18th, 2008, 12:18 pm
- Location: Nottinghamshire
- eBay: matt5cott
- Initials: MAT
- Contact:
Re: Potentiometer tops for AWSD/e2/e3 control box pots
kernow wrote:Most pointless mod ever, I challenge someone to think of one more futile.
They feel nice though! An utter **** to get on, I guess my girth is bigger than expected
yes ....
I like your white circuit board, mines crap green
- yosai
- Windy City
- Posts: 4057
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Potentiometer tops for AWSD/e2/e3 control box pots
That's looking fresh man.