Ghetto ways of connecting sanwa sticks lol?
-
- Please Continue...
- Posts: 222
- Joined: August 17th, 2008, 4:20 pm
- Location: Wakefield
- Initials: MEL
Ghetto ways of connecting sanwa sticks lol?
Anyone come up with a decent maplins or similiar way of connecting to the 5 pin connectors on these sticks?
- grantspain
- Tech Head
- Posts: 4823
- Joined: August 17th, 2008, 4:23 pm
- Location: down south
Re: Ghetto ways of connecting sanwa sticks lol?
yeah,solder direct-done it last week as i could not be bothered to find a plugMellor wrote:Anyone come up with a decent maplins or similiar way of connecting to the 5 pin connectors on these sticks?
- Alec
- Please Continue...
- Posts: 76
- Joined: September 5th, 2008, 12:08 am
- Location: CA, USA
Re: Ghetto ways of connecting sanwa sticks lol?
maybe solder or hot glue might work fine for a console stick, could be too hood for a cabinet though.
the harnesses should be relatively cheap though. Here in the states LizardLick sells them for $5 each. If you're buying new sticks, they'll be included most likely. Its waiting on shipping thats a bitch, especially when there are ggs to be had.
the harnesses should be relatively cheap though. Here in the states LizardLick sells them for $5 each. If you're buying new sticks, they'll be included most likely. Its waiting on shipping thats a bitch, especially when there are ggs to be had.
- Mayhem
- Posts: 264
- Joined: August 17th, 2008, 10:15 pm
- Location: Stockholm, Sweden
- eBay: Mayhem_SWE
- Contact:
Re: Ghetto ways of connecting sanwa sticks lol?
JST-NH is the original connector. Similar connectors with a pitch of .1" / 2.54 mm should work as well, for example Molex KK.
Once I start I cannot stop myself
-
- Please Continue...
- Posts: 222
- Joined: August 17th, 2008, 4:20 pm
- Location: Wakefield
- Initials: MEL
Re: Ghetto ways of connecting sanwa sticks lol?
Cheers guys,
Yeah I should really order a couple but patience has never been a strong point.
Lol, thats what I was going to do failing another option Grant
Yeah I should really order a couple but patience has never been a strong point.
Lol, thats what I was going to do failing another option Grant
- cools
- Armed Police Buttrider
- Posts: 13455
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Ghetto ways of connecting sanwa sticks lol?
Geezer sells them. Easy enough to cut to size.
- majors
- Posts: 179
- Joined: November 5th, 2008, 12:36 am
- Location: N. Carolina
- Contact:
Re: Ghetto ways of connecting sanwa sticks lol?
I've been using old PC motherboard serial cable connectors. It has 9 pins, but I only use the top 5. Getto, but like Grant said sometimes you're in a pinch.
Majors -=- Wedoca '18