Konami Windy 1P Panel Vector/Scan?
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Konami Windy 1P Panel Vector/Scan?
Does anybody have a scan or vector for a single player Windy panel?
This is the best I've been able to find so far. I don't really want to start **** around with converting the two player vector.
Cheers.
This is the best I've been able to find so far. I don't really want to start **** around with converting the two player vector.
Cheers.
You do not have the required permissions to view the files attached to this post.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Konami Windy 1P Panel Vector/Scan
The texture on that is wrong.
If I remember correctly, the Windy 1 2P textures are the same as the Windy 2 1P textures, and the Windy 1 1P textures are the same as the Windy 2 2P textures. Something like that anyway - there was something common between them. Might have been to do with the textures on the colour matching the white or something.
The ONLY accurate one I know of is my Windy II one. Not to blow my own trumpet, but the texturing is bang on (bar some artistic license where the holes are concerned). Even zorgs very good 2P Windy one is sloppy when you study it closely against an original.
If I remember correctly, the Windy 1 2P textures are the same as the Windy 2 1P textures, and the Windy 1 1P textures are the same as the Windy 2 2P textures. Something like that anyway - there was something common between them. Might have been to do with the textures on the colour matching the white or something.
The ONLY accurate one I know of is my Windy II one. Not to blow my own trumpet, but the texturing is bang on (bar some artistic license where the holes are concerned). Even zorgs very good 2P Windy one is sloppy when you study it closely against an original.
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Konami Windy 1P Panel Vector/Scan?
Thanks Matt.
I both the 2P panel vectors from the wiki. I did start to convert one of them to a single player but as I've not done too much vector work it's pretty time consuming.
I both the 2P panel vectors from the wiki. I did start to convert one of them to a single player but as I've not done too much vector work it's pretty time consuming.
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Konami Windy 1P Panel Vector/Scan?
Indeed.
Thamiel PMed me yesterday regarding the Windy II 1P panel. He's thrown together a quick one for that. I'd suggest hanging on and seeing how his turns out then just colour swapping it and the logo.
Thamiel PMed me yesterday regarding the Windy II 1P panel. He's thrown together a quick one for that. I'd suggest hanging on and seeing how his turns out then just colour swapping it and the logo.
- TadCool
- 'Slayer'
- Posts: 1080
- Joined: February 14th, 2010, 3:00 pm
- Location: Japan, Chiba
- eBay: Daicombo
- Initials: RAF
Re: Konami Windy 1P Panel Vector/Scan?
I've never seen an official Windy (not Windy II) 1P panel. Any pics, Cools?
Candy Cabs 4 Life.
- joeblade
- You're looking good Tim
- Posts: 798
- Joined: September 13th, 2008, 6:18 pm
- Location: London
Re: Konami Windy 1P Panel Vector/Scan?
yosai wrote:Thanks Matt.
I both the 2P panel vectors from the wiki. I did start to convert one of them to a single player but as I've not done too much vector work it's pretty time consuming.
If your talking about moving some shizzle round in illustrator for you I'll have a look mush!!
Might be able to help you with a print too!
For gods sake, its a carton box - not the holy grail!
- cools
- Armed Police Buttrider
- Posts: 13459
- Joined: August 17th, 2008, 4:49 pm
- Location: Wales, United Kingdom
- eBay: hordarian
- Initials: CLS
Re: Konami Windy 1P Panel Vector/Scan?
I believe this one is original: http://www.flickr.com/photos/dubdubdub/ ... 8K-7Co58T/"
- TadCool
- 'Slayer'
- Posts: 1080
- Joined: February 14th, 2010, 3:00 pm
- Location: Japan, Chiba
- eBay: Daicombo
- Initials: RAF
Re: Konami Windy 1P Panel Vector/Scan?
I've seen that pic before, but I don't think that's an original overlay. Looks like a print out of this. You can see it's not gray where it should be, just like the repro on the link.
Both pink shades are way off too, they should be the same as the side art.
Check out the Windy II version from the same guy - same story with the gray.
The only pic I've found that seems to show an official Windy 1P overlay is this one - look there in the back:
Crappy pic, but seems like all the colors are spot on.
Would love to see a closer pic.
Both pink shades are way off too, they should be the same as the side art.
Check out the Windy II version from the same guy - same story with the gray.
The only pic I've found that seems to show an official Windy 1P overlay is this one - look there in the back:
Crappy pic, but seems like all the colors are spot on.
Would love to see a closer pic.
Candy Cabs 4 Life.
-
- Posts: 42
- Joined: August 7th, 2013, 2:16 am
- Location:
Re: Konami Windy 1P Panel Vector/Scan?
Just about done with the 1p overlay file for the Windy II. I'll run off a Windy I version as well using the same colours from cools file.
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Konami Windy 1P Panel Vector/Scan?
Thanks for the offer, I may give you a shout depending on how it pans out.joeblade wrote:If your talking about moving some shizzle round in illustrator for you I'll have a look mush!!
Might be able to help you with a print too!
If you could that would beThamiel wrote:Just about done with the 1p overlay file for the Windy II. I'll run off a Windy I version as well using the same colours from cools file.
-
- Posts: 42
- Joined: August 7th, 2013, 2:16 am
- Location:
Re: Konami Windy 1P Panel Vector/Scan?
Here's what i've done for it, not really sure what else I can do without a decent photo of a stock panel. Can't believe there isn't a shot of it anywhere.
Basically this is the 1 player WindyII panel i've been working on with the colours taken directly from the 2 player Windy vector file on the wiki.
http://www.mediafire.com/view/bk89on316 ... ndy-1P.pdf"
If anyone has any input go for it. The colours seem very dark to me, the background in particular seems wrong. Feel like it's too dark. Anyone printed that 2 player file from the wiki? Be good to hear how accurate it was "in the flesh".
Basically this is the 1 player WindyII panel i've been working on with the colours taken directly from the 2 player Windy vector file on the wiki.
http://www.mediafire.com/view/bk89on316 ... ndy-1P.pdf"
If anyone has any input go for it. The colours seem very dark to me, the background in particular seems wrong. Feel like it's too dark. Anyone printed that 2 player file from the wiki? Be good to hear how accurate it was "in the flesh".
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Konami Windy 1P Panel Vector/Scan?
Excellent, thanks.
I'll make a few adjustments tomorrow and upload the results.
Edit. Just seem the pic. That looks great, nice job.
I'll try and color match it to my 2p panel tomorrow.
I'll make a few adjustments tomorrow and upload the results.
Edit. Just seem the pic. That looks great, nice job.
I'll try and color match it to my 2p panel tomorrow.
-
- Posts: 42
- Joined: August 7th, 2013, 2:16 am
- Location:
Re: Konami Windy 1P Panel Vector/Scan?
No worries, keen to see how close you can get it.
- yosai
- Windy City
- Posts: 4061
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Konami Windy 1P Panel Vector/Scan?
My monitor may not be professionally calibrated but the colours are pretty much bang on.
Good stuff.
Thanks again for the vector, I;ll get it printed out and post the results.
Good stuff.
Thanks again for the vector, I;ll get it printed out and post the results.
-
- Posts: 42
- Joined: August 7th, 2013, 2:16 am
- Location:
Re: Konami Windy 1P Panel Vector/Scan?
Looking forward to it! Thanks go to the guys who made them originally though, I just rearranged that **** into a close as possible approximation of the originals.
- TadCool
- 'Slayer'
- Posts: 1080
- Joined: February 14th, 2010, 3:00 pm
- Location: Japan, Chiba
- eBay: Daicombo
- Initials: RAF
Re: Konami Windy 1P Panel Vector/Scan?
Great stuff, guys. Can't wait to see the printed results.
Candy Cabs 4 Life.
- sunn
- Please Continue...
- Posts: 1
- Joined: October 17th, 2017, 4:51 pm
- Location: france
- eBay: Sunn
- Initials: J.K
Re: Konami Windy 1P Panel Vector/Scan?
hello and first of all, sorry for my bad english,
does someone know where to find 1 player panel konami windy vector with the good colors ?
are the printed results talked about in this topic good ?
thank you
Sunn.
does someone know where to find 1 player panel konami windy vector with the good colors ?
are the printed results talked about in this topic good ?
thank you
Sunn.