I have 2 naomi universal cabinets arriving in a few weeks, but am worried about getting them up a flight of stairs and into a room that has a small doorway.
The doorway is only 28 inches wide.
I was wondering how much of the machines i would have to dismantle to get them up the stairs and through the small doorway, are there any short cuts i could take to minimize the amount of work. I wanted to avoid taking the machine completely apart if possible.
Has anybody faced a situation like this before? If so could you give me some pointers on how to tackle the situation and what tools i will need to do the job.
Cheers.
Help me get my Net city through a small doorway
-
- Posts: 2
- Joined: August 29th, 2013, 12:56 pm
- Location:
- grainflavour
- Please Continue...
- Posts: 141
- Joined: March 16th, 2013, 7:21 pm
- Location: Lancashire
- eBay: grain-flavour
Re: Help me get my Net city through a small doorway
First thing to come to terms with is you will need to take it all apart
- spikehead
- Posts: 28
- Joined: October 4th, 2010, 11:48 am
- Location: Germany
- eBay: neles72
Re: Help me get my Net city through a small doorway
The dimensions of the Naomi are:
760 x 980 x 1750 mm
If you are lucky just have to remove the control bucket and/or leg covers incl. the feet. Otherwise you have to detach the legs from the base. Good thing is you can chop it right then.
760 x 980 x 1750 mm
If you are lucky just have to remove the control bucket and/or leg covers incl. the feet. Otherwise you have to detach the legs from the base. Good thing is you can chop it right then.