Page 1 of 1
Aero city river service panel
Posted: August 14th, 2013, 7:02 pm
by ruderudie
I want to swap my original cp with a 12b river service one. The problem is, the original joystick plates are s-shaped (seimitsu), while the cp of the river service panel needs a 'flat' plate.
Are there owners of the river service cp who can tell me which plate or joysticks i need for this cp?
Re: Aero city river service panel
Posted: August 14th, 2013, 7:27 pm
by LoRez
I think the RE is what you're after.The Mayor will probably know for sure
http://wiki.arcadeotaku.com/w/Mounting_Plates"
Re: Aero city river service panel
Posted: August 16th, 2013, 12:05 pm
by AeroCityMayor
I'll take some photo's when I get home from work tonight.
HTH
Cheers,
Ralph.
Re: Aero city river service panel
Posted: August 17th, 2013, 5:11 pm
by ruderudie
Ok, thanks!
Re: Aero city river service panel
Posted: August 19th, 2013, 12:39 pm
by AeroCityMayor
http://petes-emulation.com/ftp/alien_ma ... Inside.jpg"
I haven't swapped sticks in panels so not certain which plate you'd need. Hopefully the photo above will help though.
Cheers,
Ralph.
Re: Aero city river service panel
Posted: August 19th, 2013, 3:17 pm
by ruderudie
Are these LS 32's with a flat mountingplate?
Re: Aero city river service panel
Posted: August 19th, 2013, 3:32 pm
by LoRez
Yes.LS-32 with RE (flat) plate
Re: Aero city river service panel
Posted: August 19th, 2013, 6:59 pm
by ruderudie
Thanks guys!