Arcade cabinet hardware and accessories
ruderudie
Please Continue...
Posts: 90 Joined: September 15th, 2008, 8:25 am
Location:
Post
by ruderudie » August 14th, 2013, 7:02 pm
I want to swap my original cp with a 12b river service one. The problem is, the original joystick plates are s-shaped (seimitsu), while the cp of the river service panel needs a 'flat' plate.
Are there owners of the river service cp who can tell me which plate or joysticks i need for this cp?
LoRez
Please Continue...
Posts: 612 Joined: August 17th, 2008, 4:05 pm
Location: UK
Post
by LoRez » August 14th, 2013, 7:27 pm
I think the RE is what you're after.The Mayor will probably know for sure
http://wiki.arcadeotaku.com/w/Mounting_Plates "
AeroCityMayor
Previously alien_mame
Posts: 2005 Joined: July 25th, 2009, 1:05 pm
Location: West Yorks, UK
eBay: air_fortless
Initials: ACM
Post
by AeroCityMayor » August 16th, 2013, 12:05 pm
I'll take some photo's when I get home from work tonight.
HTH
Cheers,
Ralph.
ruderudie
Please Continue...
Posts: 90 Joined: September 15th, 2008, 8:25 am
Location:
Post
by ruderudie » August 17th, 2013, 5:11 pm
Ok, thanks!
AeroCityMayor
Previously alien_mame
Posts: 2005 Joined: July 25th, 2009, 1:05 pm
Location: West Yorks, UK
eBay: air_fortless
Initials: ACM
Post
by AeroCityMayor » August 19th, 2013, 12:39 pm
http://petes-emulation.com/ftp/alien_ma ... Inside.jpg "
I haven't swapped sticks in panels so not certain which plate you'd need. Hopefully the photo above will help though.
Cheers,
Ralph.
ruderudie
Please Continue...
Posts: 90 Joined: September 15th, 2008, 8:25 am
Location:
Post
by ruderudie » August 19th, 2013, 3:17 pm
Are these LS 32's with a flat mountingplate?
LoRez
Please Continue...
Posts: 612 Joined: August 17th, 2008, 4:05 pm
Location: UK
Post
by LoRez » August 19th, 2013, 3:32 pm
Yes.LS-32 with RE (flat) plate
ruderudie
Please Continue...
Posts: 90 Joined: September 15th, 2008, 8:25 am
Location:
Post
by ruderudie » August 19th, 2013, 6:59 pm
Thanks guys!