I want to swap my original cp with a 12b river service one. The problem is, the original joystick plates are s-shaped (seimitsu), while the cp of the river service panel needs a 'flat' plate.
Are there owners of the river service cp who can tell me which plate or joysticks i need for this cp?
Aero city river service panel
- ruderudie
- Please Continue...
- Posts: 90
- Joined: September 15th, 2008, 8:25 am
- Location:
- LoRez
- Posts: 612
- Joined: August 17th, 2008, 4:05 pm
- Location: UK
Re: Aero city river service panel
I think the RE is what you're after.The Mayor will probably know for sure
http://wiki.arcadeotaku.com/w/Mounting_Plates"
http://wiki.arcadeotaku.com/w/Mounting_Plates"
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Aero city river service panel
I'll take some photo's when I get home from work tonight.
HTH
Cheers,
Ralph.
HTH
Cheers,
Ralph.
- ruderudie
- Please Continue...
- Posts: 90
- Joined: September 15th, 2008, 8:25 am
- Location:
Re: Aero city river service panel
Ok, thanks!
- AeroCityMayor
- Previously alien_mame
- Posts: 2005
- Joined: July 25th, 2009, 1:05 pm
- Location: West Yorks, UK
- eBay: air_fortless
- Initials: ACM
Re: Aero city river service panel
http://petes-emulation.com/ftp/alien_ma ... Inside.jpg"
I haven't swapped sticks in panels so not certain which plate you'd need. Hopefully the photo above will help though.
Cheers,
Ralph.
I haven't swapped sticks in panels so not certain which plate you'd need. Hopefully the photo above will help though.
Cheers,
Ralph.
- ruderudie
- Please Continue...
- Posts: 90
- Joined: September 15th, 2008, 8:25 am
- Location:
Re: Aero city river service panel
Are these LS 32's with a flat mountingplate?
- LoRez
- Posts: 612
- Joined: August 17th, 2008, 4:05 pm
- Location: UK
Re: Aero city river service panel
Yes.LS-32 with RE (flat) plate
- ruderudie
- Please Continue...
- Posts: 90
- Joined: September 15th, 2008, 8:25 am
- Location:
Re: Aero city river service panel
Thanks guys!