LS-32 on Sanwa panel

Post by **TMallu** » June 5th, 2013, 12:38 pm

What mounting plate do I need?

Post by **Rossyra** » June 5th, 2013, 2:38 pm

It'll be the RE plate if any, although I'm not convinced it will fit, and even if it fits the holes, the sticks will still sit too low.

voona · Post by **voona** » June 6th, 2013, 3:06 am

It fits with the SS plate. It DOES sit lower but I quite like it

Post by **TMallu** » June 6th, 2013, 7:11 am

Aargh, didn't have time to check the panel and take measurements and here I am at work again...

RE, as normal straight plate.. thats what I tought first.
SS-plate? I don't see how that would fit...

voona · Post by **voona** » June 6th, 2013, 8:00 am

My bad I have the VF mounting plate not SS

Post by **TMallu** » June 6th, 2013, 8:13 am

what joystick is that? also seems to be different panel...

Post by **Rossyra** » June 6th, 2013, 10:02 am

That's an LS-56 and a different panel

The LS-32 will not fit a VF mounting plate.

Looking at the outer holes on your panel they will most likely be too narrow, you might have to drill the RE plate. As I say, the sticks will be too low no matter what as that panel stands.

Post by **cools** » June 6th, 2013, 10:20 am

Just use a different stick for now. The LS32 is great if it fits the panel, but it's not the holy grail.

Post by **TMallu** » June 6th, 2013, 10:39 am

Thanks guys.

LS-32 on Sanwa panel

LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel

Re: LS-32 on Sanwa panel