Hi All,
Just picked up 2 x Blast City cabinets and they are a little dirty mostly on the control panel
What would you guys recommend for first cleaning them up and second buffing them to a nice finish?
Thanks Guys !
Cleaning Blast City
-
- Please Continue...
- Posts: 6
- Joined: February 19th, 2013, 8:10 am
- Location:
- moh
- Please Continue...
- Posts: 136
- Joined: August 24th, 2012, 5:02 pm
- Location: Toronto, Canada
Re: Cleaning Blast City
Mr. Clean magic erasers are your best friend
- hedorah
- Please Continue...
- Posts: 98
- Joined: April 15th, 2009, 12:19 am
- Location: san francisco
Re: Cleaning Blast City
Agreed those things work awesome, just dont use them on any of the clear plastic bits (header card etc). Also be careful when using them on the monitor bezel as mine seemed fond of chewing through some of the black paint.
- moh
- Please Continue...
- Posts: 136
- Joined: August 24th, 2012, 5:02 pm
- Location: Toronto, Canada
Re: Cleaning Blast City
yeah, they can be very abrasive. I also suggest using Goo Gone to remove any stickers, or sticky residue.hedorah wrote:Agreed those things work awesome, just dont use them on any of the clear plastic bits (header card etc). Also be careful when using them on the monitor bezel as mine seemed fond of chewing through some of the black paint.
- TadCool
- 'Slayer'
- Posts: 1080
- Joined: February 14th, 2010, 3:00 pm
- Location: Japan, Chiba
- eBay: Daicombo
- Initials: RAF
- Relaxt
- Posts: 8
- Joined: April 20th, 2013, 11:10 pm
- Location:
Re: Cleaning Blast City
me too!!TadCool wrote:Me want pics!
-
- Please Continue...
- Posts: 17
- Joined: April 30th, 2013, 5:52 pm
- Location: Miami, FL, USA
Re: Cleaning Blast City
I've read using the Magic Erasers on glossy plastic leaves noticeable marks. Can anyone confirm/deny or have other recommendations?