How to remove antistatic coating/scratches arcade monitor

Arcade cabinet hardware and accessories
Forum rules
ArcadeOtaku forum introduction & rules
User avatar
yosai
280bpm's too slow
Posts: 3840
Joined: August 17th, 2008, 5:00 pm
Location: London

How to remove antistatic coating/scratches arcade monitor

Postby yosai » August 26th, 2008, 11:39 pm

Copy/pasted from a KC cache, originally written by gargoyle67.

Just fished removing my antistatic coating from my monitor, incase other people want to do this I though I would do a little guide.
First you need a glass polishing kit, I got mine from this site:
http://www.scratchglass.com/pages/glasspolishkit.htm
they take paypal and are pretty quick at posting the kit.
You also need a power drill recommended speed 2000 rpms, and a water sprayer. I also recommend covering up the sides,top, and bottom around your monitor with towels as there will be a fair amount of spray, I didn't to start off and sprayed my wall and display cabinet and had to wipe them down so be warned !. (unplug power to your cab first !)

Edit**Also good to have a bowl of water for cleaning\wetting wiping cloth and a big kitchen roll for drying down the screen.


Ok read the instructions and then attach the buffer to the power drill, attatch the buffer disc:
Image

Apply some of the polishing compound:
Image

Get the spray bottle ready, I started the job without one (don't) you can control the amount of water with the sprayer a lot easier than with say a sponge:
Image

Give the screen a light spray of water with the sprayer and then start to polish the screen with the drill-buffer moving back and forth horizontally from side to side. As you can see from the pic the coating starts to come off, takes quite a bit of time going over and over the area. A warning if you don't want you screen to crack DON'T hold the buffer in one spot for more than 20 seconds as per the instructions (heat build up=crack, not good Evil or Very Mad :
Image

Zap that dirty looking coating, close up pic:
Image

Just a couple of patches left, took me about 2 hrs to get to this stage:
Image

Left mark up close:
Image

Now you see it , now you don't Happy :
Image

Bottom mark still visable:
Image

Now it's not:
Image

My new shiny screen :P :
Image

Dito:
Image

That's one dirty disc:
Image

This pic show's how dirty the disc's got up until the last disc which I used to finished off with:
Image

These were the marks that I had before I started this little project:
Image

Diff angle:
Image

I also had some marks down the left side of the screen and a few swirl marks right of centre, now all gone :D , The kit will also remove slight scratches as long as you can run your finger nail over the area and not snag your nail. I suppose all that's left to say is I'm over the moon with the job :P , It took about 3 hrs from start to finish. I also take no responsibility for any damage you do to your monitor from this guide, but you already knew that right Happy .
_________________
******Gargoyle's always watching you with a stoney stare.******
kernow wrote:I'd have my mouth on her **** quicker than a tramp on chips
User avatar
kernow
:problem: child
Posts: 17749
Joined: August 17th, 2008, 2:01 pm
Location: Devon
Initials: KRN
Contact:

Re: How to remove antistatic coating/scratches arcade monitor

Postby kernow » August 26th, 2008, 11:54 pm

Nice, but I haven't got the balls to attempt that, no way.

I do have a slight mark in one of my monitors but I think it will be ok living with it hehe

good job!
David... The wind blows... The wind blows... Bits of your... life awayee
User avatar
DarthBoMan
Posts: 117
Joined: August 17th, 2008, 4:31 pm
Location: Sweden
eBay: darthboman
Initials: DBM

Re: How to remove antistatic coating/scratches arcade monitor

Postby DarthBoMan » September 3rd, 2008, 9:49 pm

Isn't the antistatic coating there for a reason? It just sounds like a bad idea to get rid of it? :?:
-x- I geek, therefore I am -x-
gamerworld: http://www.gamerworld.se
User avatar
manimani
Posts: 62
Joined: January 3rd, 2010, 9:58 pm
Location: France=>Paris
eBay: paradise-avenue
Initials: sly

Re: How to remove antistatic coating/scratches arcade monitor

Postby manimani » February 26th, 2017, 5:16 pm

is it possible to update pictures please ?
Nothing will bring returned spot of an electron gun which varies according to luminous intensity, and sweep screen creating perfect scanlines. (C) Epsylon
User avatar
Shadolf
Posts: 274
Joined: November 6th, 2014, 12:20 pm
Location: South Germany
eBay: 1984indigo

Re: How to remove antistatic coating/scratches arcade monitor

Postby Shadolf » February 26th, 2017, 5:27 pm

DarthBoMan wrote:Isn't the antistatic coating there for a reason? It just sounds like a bad idea to get rid of it? :?:


Yeah, that was what I was thinking too. But I think the only thing taht will happen is that you have to remove dust from the screen more often. Does someone know what material this antistatic coating is? Is there a way to apply a new layer of such coating?
Asure
Posts: 529
Joined: April 17th, 2013, 5:16 pm
Location: Netherlands
eBay: asure_nl

Re: How to remove antistatic coating/scratches arcade monitor

Postby Asure » February 27th, 2017, 9:48 am

This coating usually also adds a bit of contrast to the screen. Without it, the screen will be a bit brighter, and you see things much clearer.
I've seen a de-coated tube where it was possible to see the phosphor after glow a bit. With the layer removed, the contrast goes down a bit as well. I didn't really like it.

Be careful when doing this, use water and a face/eye mask. The glass/coating you sand of is easily inhaled and as you know the tube front is lined with lead to prevent any passing of x-rays.
User avatar
wigsplitta
Savile's alibi
Posts: 1099
Joined: December 11th, 2008, 11:38 am
Location: Fareham / Crawley

Re: How to remove antistatic coating/scratches arcade monitor

Postby wigsplitta » February 27th, 2017, 10:57 am

manimani wrote:is it possible to update pictures please ?

Here's a couple of pics from screens I've done in the past, from here viewtopic.php?f=4&t=2448
I only did it because the anti static coating on both monitors was already rubbed off/scratched in places, and looked pretty ugly.
wigsplitta wrote:Before:
Image

After:
Image

Before:
Image

After:
Image
I Got PAID...
ウィッグスプリッター - スーパーガレージゲームセンター。
User avatar
Rossyra
Supermod
Posts: 9409
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: How to remove antistatic coating/scratches arcade monitor

Postby Rossyra » February 27th, 2017, 12:33 pm

It's not necessary to use a machine polisher. I've done one of my own and one for a friend by hand ( :fastlove: ) using a microfibre cloth and rubbing conpound.
Image
User avatar
Sumez
Posts: 45
Joined: December 12th, 2016, 8:45 am
Location: Denmark
Initials: SMZ

Re: How to remove antistatic coating/scratches arcade monitor

Postby Sumez » February 27th, 2017, 1:19 pm

Curious, what polishing compound are you guys using? Anything specific that would be best to avoid?
User avatar
yosai
280bpm's too slow
Posts: 3840
Joined: August 17th, 2008, 5:00 pm
Location: London

Re: How to remove antistatic coating/scratches arcade monitor

Postby yosai » February 27th, 2017, 1:26 pm

Have a quick forum search for Novus.
kernow wrote:I'd have my mouth on her **** quicker than a tramp on chips
User avatar
crunchywasp
stompin' an' jumpin'
Posts: 9037
Joined: February 10th, 2012, 2:51 pm
Location: Fife, Scotland
eBay: crunchywasp
Initials: MAK

Re: How to remove antistatic coating/scratches arcade monitor

Postby crunchywasp » February 27th, 2017, 2:13 pm

Rossyra wrote:It's not necessary to use a machine polisher. I've done one of my own and one for a friend by hand ( :fastlove: ) using a microfibre cloth and rubbing conpound.

I can confirm that that one had a happy ending.

It looks great now and I don't think we ingested too much lead. Just jizz mainly.
Image
User avatar
Sumez
Posts: 45
Joined: December 12th, 2016, 8:45 am
Location: Denmark
Initials: SMZ

Re: How to remove antistatic coating/scratches arcade monitor

Postby Sumez » February 27th, 2017, 3:40 pm

yosai wrote:Have a quick forum search for Novus.


I know what Novus is, but I have never heard about using it on a monitor :O
User avatar
Rossyra
Supermod
Posts: 9409
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: How to remove antistatic coating/scratches arcade monitor

Postby Rossyra » February 27th, 2017, 5:58 pm

Farecla G3.
Image
User avatar
OlDirty
Posts: 273
Joined: January 12th, 2015, 8:26 pm
Location: Switzerland

Re: How to remove antistatic coating/scratches arcade monitor

Postby OlDirty » March 13th, 2017, 3:03 pm

I guess you can use nearly every polish compound.
Zaino f.e. has a glass polish in their product line.
http://www.zainostore.com/product/Z-12.html

I used that for car windows with my excenter polisher. It won't remove scratches, but makes your window very clean again. Problem is, that very fine scratches are more visible afterwards because they are not filled anymore with dirt.
Evanaporm
Posts: 2
Joined: March 24th, 2017, 1:32 pm
Location: Poland
eBay: i don't have

How to remove antistatic coating/scratches arcade monitor

Postby Evanaporm » March 27th, 2017, 9:19 am

I was wondering if anyone here owned and might know the monitor size of Segas Air Rescue arcade game?
User avatar
nem
Posts: 795
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: How to remove antistatic coating/scratches arcade monitor

Postby nem » March 27th, 2017, 3:33 pm

For Air Rescue, Nanao MS6-26SG.
User avatar
trev1976
Posts: 751
Joined: March 30th, 2009, 7:17 pm
Location: Southampton

Re: How to remove antistatic coating/scratches arcade monitor

Postby trev1976 » April 1st, 2017, 6:02 pm

Done this today on my Astro ,it has a MS9 monitor in it but the anti static coating had loads of scratches and was also patchy which made white screens look pretty awful.. I used G3 and it took me about an hour and my arm feels like it's gonna fall off but it was well worth it. Screen is now scratch free and looks much more vibrant and clean.

Well chuffed

https://www.flickr.com/gp/149040145@N03/B493p6
Check out my "1cc" YouTube Channel
YouTube
User avatar
Rossyra
Supermod
Posts: 9409
Joined: February 12th, 2009, 1:24 am
Location: UK

Re: How to remove antistatic coating/scratches arcade monitor

Postby Rossyra » April 1st, 2017, 8:01 pm

Nice work :awe:
Image
User avatar
crunchywasp
stompin' an' jumpin'
Posts: 9037
Joined: February 10th, 2012, 2:51 pm
Location: Fife, Scotland
eBay: crunchywasp
Initials: MAK

Re: How to remove antistatic coating/scratches arcade monitor

Postby crunchywasp » April 1st, 2017, 8:23 pm

8-)
Image

Return to “Cabinet Q&A”



Who is online

Users browsing this forum: No registered users