Any MVS-U4 Owners Out There

Arcade cabinet hardware and accessories
User avatar
Niko
Posts: 52
Joined: May 19th, 2015, 4:27 pm
Location: Louisville, KY

Re: Any MVS-U4 Owners Out There

Post by Niko »

n3o2o1o wrote:HI, today i've get my 2nd MVS U4 (in 25" this time, the other one is a 29")
I have some work to do on it (paint), but it have a problem with the TOEI board :(, hope i c an repair it quickly (i have no image and can hear some kind of whistle near the big caps)
I think from what I've read, that noise comes from the flyback. It might be the source of your problems.
User avatar
n3o2o1o
Posts: 27
Joined: February 3rd, 2015, 3:21 pm
Location: France
eBay: n3ogeo
Initials: N3O

Re: Any MVS-U4 Owners Out There

Post by n3o2o1o »

it seem to come to somewhere else, i va already tested the flyback and it seems to be good, i'm gonna first capkit it and change all the transistors :p
。◕‿◕。Candy Cabs 。◕‿◕。
User avatar
nem
Posts: 1827
Joined: August 17th, 2008, 6:59 pm
Location: Finland

Re: Any MVS-U4 Owners Out There

Post by nem »

The whistling will come from the flyback. It doesn't mean it is broken, and with luck, it might go away on its own (at least mine did).
User avatar
cools
Armed Police Buttrider
Posts: 12791
Joined: August 17th, 2008, 4:49 pm
Location: Wales, United Kingdom
eBay: hordarian
Initials: CLS

Re: Any MVS-U4 Owners Out There

Post by cools »

Not necessarily, it might be another coil whining.
Image
User avatar
n3o2o1o
Posts: 27
Joined: February 3rd, 2015, 3:21 pm
Location: France
eBay: n3ogeo
Initials: N3O

Re: Any MVS-U4 Owners Out There

Post by n3o2o1o »

hi there, so i now have a picture ... well 50% of a picture :p

Image

i'm gonna change the Sanyo STK 79915. (if someone have the datasheet ... )

Other thing , it's ready for paint ^^ (with her little sister)

photo gallery :
http://imgur.com/a/mFZA3
。◕‿◕。Candy Cabs 。◕‿◕。
User avatar
n3o2o1o
Posts: 27
Joined: February 3rd, 2015, 3:21 pm
Location: France
eBay: n3ogeo
Initials: N3O

Re: Any MVS-U4 Owners Out There

Post by n3o2o1o »

Picture is now OK

Image

Painting done

Image

Image

Image
。◕‿◕。Candy Cabs 。◕‿◕。
User avatar
robotype
Posts: 93
Joined: April 27th, 2009, 9:11 am
Location: Milano
eBay: toy_pop

Re: Any MVS-U4 Owners Out There

Post by robotype »

hi, I am looking for this one in hi-res printable size if it was ever made (it's not in the wiki)

Image
User avatar
NGAES
Posts: 147
Joined: August 28th, 2008, 5:40 pm
Location: Stockholm, Sweden

Re: Any MVS-U4 Owners Out There

Post by NGAES »

Looks damn nice!
Looking for Super Neo 29 parts, any version - let know if you have any!
1P control panel especially.
Deneteus
Posts: 9
Joined: October 18th, 2014, 5:16 pm
Location: Humble,TX (Houston)
eBay: dsmith1748
Initials: DDS
Contact:

Re: Any MVS-U4 Owners Out There

Post by Deneteus »

robotype wrote:hi, I am looking for this one in hi-res printable size if it was ever made (it's not in the wiki)

Image
There is some company in Europe that actually makes replacements for that. I saw a new one on ebay.
'There's a storm coming!' - Wolverine / |Ikari Warriors Never Die!|
Deneteus
Posts: 9
Joined: October 18th, 2014, 5:16 pm
Location: Humble,TX (Houston)
eBay: dsmith1748
Initials: DDS
Contact:

Re: Any MVS-U4 Owners Out There

Post by Deneteus »

n3o2o1o wrote:Picture is now OK
Good Job!
'There's a storm coming!' - Wolverine / |Ikari Warriors Never Die!|
User avatar
robotype
Posts: 93
Joined: April 27th, 2009, 9:11 am
Location: Milano
eBay: toy_pop

Re: Any MVS-U4 Owners Out There

Post by robotype »

Deneteus wrote:
robotype wrote:hi, I am looking for this one in hi-res printable size if it was ever made (it's not in the wiki)

Image
There is some company in Europe that actually makes replacements for that. I saw a new one on ebay.
that would be awsome! I am in Italy
do you have a clue about who makes it?
can't find it on ebay at the moment
the vector file would be ok too
User avatar
n3o2o1o
Posts: 27
Joined: February 3rd, 2015, 3:21 pm
Location: France
eBay: n3ogeo
Initials: N3O

Re: Any MVS-U4 Owners Out There

Post by n3o2o1o »

finally finished

http://www.youtube.com/watch?v=L5jy6U1xqUc#t=105

now working on my aerocity :p
。◕‿◕。Candy Cabs 。◕‿◕。
Spankminister
Posts: 14
Joined: September 24th, 2016, 8:21 pm
Location: Virginia

Re: Any MVS-U4 Owners Out There

Post by Spankminister »

That looks great, appreciate the video :D
Spankminister
Posts: 14
Joined: September 24th, 2016, 8:21 pm
Location: Virginia

Re: Any MVS-U4 Owners Out There

Post by Spankminister »

Deneteus wrote:
robotype wrote:hi, I am looking for this one in hi-res printable size if it was ever made (it's not in the wiki)

Image
There is some company in Europe that actually makes replacements for that. I saw a new one on ebay.
Do you know the name of this part or have a link? Mine is broken so I'll need to either get a replacement or make one somehow.

BTW, I just saw the photos you uploaded, let me know if you happen to remember which paint you used for your MVS u4. Thanks!
User avatar
robotype
Posts: 93
Joined: April 27th, 2009, 9:11 am
Location: Milano
eBay: toy_pop

Re: Any MVS-U4 Owners Out There

Post by robotype »

Spankminister wrote:
Deneteus wrote:
robotype wrote:hi, I am looking for this one in hi-res printable size if it was ever made (it's not in the wiki)

Image
There is some company in Europe that actually makes replacements for that. I saw a new one on ebay.
Do you know the name of this part or have a link? Mine is broken so I'll need to either get a replacement or make one somehow.

BTW, I just saw the photos you uploaded, let me know if you happen to remember which paint you used for your MVS u4. Thanks!
me too I still need this. actually I need two, a friend broke the otherone

they are very frigile because often damaged by cigarettes
Spankminister
Posts: 14
Joined: September 24th, 2016, 8:21 pm
Location: Virginia

Re: Any MVS-U4 Owners Out There

Post by Spankminister »

Previous owner of my cab bolted a 6 button metal panel that pressed into it and the stress of people leaning onto that panel cracked it. Now that I have the right size control panel, I'm going to see if I can get something from gameongrafix that's thick enough, or else put their CPO material onto like a thin acrylic piece
zumbito
Posts: 648
Joined: February 18th, 2015, 12:03 am
Location: Metro City
eBay: jaime5171

Re: Any MVS-U4 Owners Out There

Post by zumbito »

Hi, for around how much do these cabs go? I just purchased a MVS 4u board and these will be sweet to couple it with, instead of rewiring a cab.

BTW can anybody tell me the depth once the CP is removed?
Spankminister
Posts: 14
Joined: September 24th, 2016, 8:21 pm
Location: Virginia

Re: Any MVS-U4 Owners Out There

Post by Spankminister »

My CPOverlay from GameOnGrafix came, the material was really nice, but the one problem is either them or me mis-sized the graphic that's floating around the internet. I should have scaled the image to make sure the blue bordered portion was the length of the control panel, rather than the entire image. It doesn't look so bad, and I know now for the next time when I get another cpo for my 4 button panel. The material is really nice, got that textured look you see on American panels that I guess is their main product.

https://www.amazon.com/photos/share/jkk ... 2SKUJtscHC
https://www.amazon.com/photos/share/8F6 ... U5lFDBTi5h
https://www.amazon.com/photos/share/6E5 ... Pm0OvRjAW2
User avatar
robotype
Posts: 93
Joined: April 27th, 2009, 9:11 am
Location: Milano
eBay: toy_pop

Re: Any MVS-U4 Owners Out There

Post by robotype »

robotype wrote:hi, I am looking for this one in hi-res printable size if it was ever made (it's not in the wiki)

Image
still looking
Spankminister
Posts: 14
Joined: September 24th, 2016, 8:21 pm
Location: Virginia

Re: Any MVS-U4 Owners Out There

Post by Spankminister »

I could have sworn I found one, but I'm combing all my computers and coming up with nothing, which is really frustrating. Hopefully someone has this somewhere.
Post Reply