Triforce Naomi help
- IDCHAPPY
- c***3
- Posts: 2611
- Joined: May 3rd, 2010, 7:25 pm
- Location: Edinburgh
- eBay: Arcadedreams2013
- Initials: IDC
- Contact:
Triforce Naomi help
Hi peeps, finally got a chance to get into this cab yesterday at John Bud's house but it didn't go hugely well.
Monitor Chasis looks to be buggered(or the tube but it's definately getting power).
We took all the obvious triforce stuff out to try and get it to boot naomi 2 but it just didn't want to know, we kept getting an options board malfunction when booting the triforce gear( Virtua Striker did boot but kept checking media board?) and then when we put the namoi 2 it said game not compatable with this main board, we have check all the naomi gear on JB's straight naomi cab a few weeks ago and it worked fine.
Does anyone have any details of triforce wiring/cabs incase i'm missing something
Monitor Chasis looks to be buggered(or the tube but it's definately getting power).
We took all the obvious triforce stuff out to try and get it to boot naomi 2 but it just didn't want to know, we kept getting an options board malfunction when booting the triforce gear( Virtua Striker did boot but kept checking media board?) and then when we put the namoi 2 it said game not compatable with this main board, we have check all the naomi gear on JB's straight naomi cab a few weeks ago and it worked fine.
Does anyone have any details of triforce wiring/cabs incase i'm missing something
Give me a like on Facebook at:
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
- andygeezer
- Blue Skies Ahead
- Posts: 2427
- Joined: August 24th, 2008, 12:25 pm
- Location: Cambridge, UK
- Initials: AGS
Re: Triforce Naomi help
Triforce is same as powering up a Naomi or Chihiro.
Obviously putting a naomi disc on there won't work..
Obviously putting a naomi disc on there won't work..
Say hello to my little friend...
- Rossyra
- Supermod
- Posts: 7902
- Joined: February 12th, 2009, 1:24 am
- Location: UK
Re: Triforce Naomi help
I'm under the impression triforce is picky as **** about the Dimm used, could it be that?
- IDCHAPPY
- c***3
- Posts: 2611
- Joined: May 3rd, 2010, 7:25 pm
- Location: Edinburgh
- eBay: Arcadedreams2013
- Initials: IDC
- Contact:
Re: Triforce Naomi help
It's a virtua soccer cab so game with a card reader, buggered GD rom( my second one of them now ) and the triforce game virtua soccer 4, we hooked the monitor connections into JB's working naomi beside it originally to get a picture, found it was giving a gd rom error so swapped it for a working gd rom JB had. Game booted but every 15 seconds or so checked for the media board and kept looping like that.andygeezer wrote:Triforce is same as powering up a Naomi or Chihiro.
Obviously putting a naomi disc on there won't work..
After trying to figure that out for a bit we stripped out the card reader, and the tri force mobo and tried to run it as a straight naomi cab but had no luck with that either, we coulnd figure out why it wasn't working as a straight naomi, changed the i/o boards about but still no joy... didn't help that it was bloody cold at JB's
Give me a like on Facebook at:
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
- Beaps
- Posts: 127
- Joined: December 29th, 2008, 6:37 pm
- Location: Essex - UK
Re: Triforce Naomi help
You need to change the jumpers inside the mobo, then you done need the GD-ROM you can use the Net Dimm side of things one its hooked up to a PC
- johnbud
- Please Continue...
- Posts: 236
- Joined: February 24th, 2010, 11:00 am
- Location: north lanarkshire
- Initials: ELF
Re: Triforce Naomi help
anybody know where the options board is ???
we unplugged the analogue sticks and changed i/o boards, but its still saying options board fault, even when its trying to boot a naomi2 set up. never seen this fault before.
we tested the media board, its fine. we also checked the gameboard again no faults.
any advice would be great.
cheers.
john bud.
we unplugged the analogue sticks and changed i/o boards, but its still saying options board fault, even when its trying to boot a naomi2 set up. never seen this fault before.
we tested the media board, its fine. we also checked the gameboard again no faults.
any advice would be great.
cheers.
john bud.
- andygeezer
- Blue Skies Ahead
- Posts: 2427
- Joined: August 24th, 2008, 12:25 pm
- Location: Cambridge, UK
- Initials: AGS
Re: Triforce Naomi help
Type 1 Triforce?? If so it refers to the board that sits on the dimm core board, the board you plug the security chip in, chances are it's a bad connection and needs reseating.johnbud wrote:anybody know where the options board is ???
we unplugged the analogue sticks and changed i/o boards, but its still saying options board fault, even when its trying to boot a naomi2 set up. never seen this fault before.
we tested the media board, its fine. we also checked the gameboard again no faults.
any advice would be great.
cheers.
john bud.
You can use Naomi dimm boards, but they have to be 512MB and firm 3.03 or higher.
Say hello to my little friend...
- IDCHAPPY
- c***3
- Posts: 2611
- Joined: May 3rd, 2010, 7:25 pm
- Location: Edinburgh
- eBay: Arcadedreams2013
- Initials: IDC
- Contact:
Re: Triforce Naomi help
It's a type 2 triforce with the internal memory not the naomi dimm one if that helps
Give me a like on Facebook at:
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
- johnbud
- Please Continue...
- Posts: 236
- Joined: February 24th, 2010, 11:00 am
- Location: north lanarkshire
- Initials: ELF
Re: Triforce Naomi help
hi andy, cheers for that
triforce cover is purple.
main boot ver 2.17
main firm ver 0.44
main fpga ver 7.09
net firm ver 12.11
the security chip is pretty much stuck in the slot. i will lever it out, the re-seat the chip. am i reading it wrong or will a bog standard dimm do ??? i have a couple of 3.17 net dimms but would prefer to keep these, if possible. im also assuming that decased the dimms are the same ???
cheers.
john bud
triforce cover is purple.
main boot ver 2.17
main firm ver 0.44
main fpga ver 7.09
net firm ver 12.11
the security chip is pretty much stuck in the slot. i will lever it out, the re-seat the chip. am i reading it wrong or will a bog standard dimm do ??? i have a couple of 3.17 net dimms but would prefer to keep these, if possible. im also assuming that decased the dimms are the same ???
cheers.
john bud
- outrun2
- Posts: 253
- Joined: August 18th, 2010, 6:25 pm
- Location: Gloucestershire, UK
- eBay: thefonzzz
- Initials: GAZ
Re: Triforce Naomi help
I've never had much luck with dimm boards on Naomis and type 1 Chihiros. I was getting option board and media board errors a lot so ended up de-casing the whole dimm board/option board on the Naomi2 and it's been stable since. Still had a gd rom drive die as well though - cf option looks better every day but it's expensive to kit out three drivers and I have a few games for each!
Never used a Triforce mobo but I guess the errors are going to mean the same - possible bad connections between the various boards. I do tend to get problems when it's a bit colder though - get the heater on and then try it out!
Never used a Triforce mobo but I guess the errors are going to mean the same - possible bad connections between the various boards. I do tend to get problems when it's a bit colder though - get the heater on and then try it out!
Wanted:
Sega Model 3 Emergency Call Ambulance ROM board or complete Step 2 boardset.
Sega Model 3 Emergency Call Ambulance ROM board or complete Step 2 boardset.
- IDCHAPPY
- c***3
- Posts: 2611
- Joined: May 3rd, 2010, 7:25 pm
- Location: Edinburgh
- eBay: Arcadedreams2013
- Initials: IDC
- Contact:
Re: Triforce Naomi help
This wee board was plugged into the Triforce i have no clue what it is though
Give me a like on Facebook at:
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
- davewellington
- The Librarian
- Posts: 1389
- Joined: July 7th, 2010, 1:42 am
- Location: Wellington, New Zealand
- Initials: DAV
Re: Triforce Naomi help
Follow the cables back and figure it outIDCHAPPY wrote:This wee board was plugged into the Triforce i have no clue what it is though
all your wiki pages belong to me
- IDCHAPPY
- c***3
- Posts: 2611
- Joined: May 3rd, 2010, 7:25 pm
- Location: Edinburgh
- eBay: Arcadedreams2013
- Initials: IDC
- Contact:
Re: Triforce Naomi help
Yeah i know, in my defense it was getting cold and i was wanting to stick the boot into the thing
Give me a like on Facebook at:
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
- outrun2
- Posts: 253
- Joined: August 18th, 2010, 6:25 pm
- Location: Gloucestershire, UK
- eBay: thefonzzz
- Initials: GAZ
Re: Triforce Naomi help
Card reader related for Virtua Striker 4 it seems.
If you're a member.. http://www.sega-naomi.com/forum/viewtop ... cadc16de4f"
If you're a member.. http://www.sega-naomi.com/forum/viewtop ... cadc16de4f"
Wanted:
Sega Model 3 Emergency Call Ambulance ROM board or complete Step 2 boardset.
Sega Model 3 Emergency Call Ambulance ROM board or complete Step 2 boardset.
- IDCHAPPY
- c***3
- Posts: 2611
- Joined: May 3rd, 2010, 7:25 pm
- Location: Edinburgh
- eBay: Arcadedreams2013
- Initials: IDC
- Contact:
Re: Triforce Naomi help
, thanks man, Anyone needing a card reader board, card reader slots and wiring?outrun2 wrote:Card reader related for Virtua Striker 4 it seems.
If you're a member.. http://www.sega-naomi.com/forum/viewtop ... cadc16de4f"
Give me a like on Facebook at:
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn
https://www.facebook.com/pages/Arcadedr ... ef=tn_tnmn